Ciao, ho 2 file (Limits e wat_combined). Il file "Limits" contiene i limiti che voglio impostare per lo stesso test nel file "wat_combined". Il mio script JSL funziona come previsto, ma l'area "spec limit" della colonna... Per favore, fatemi sapere come risolvere il problema.
Versione Jmp: 18.2.0
txnelson Nota: ho modificato il messaggio iniziale di @Pranadeep , spostando il JSL in una casella JSL e il registro in una casella di codice
il mio codice jsl:
// --- Configuration ---
limitsFilePath = "C:\\Users\\saipranadeep\\Desktop\\JMP_Data\\script check\\Limits.jmp";
dataFilePath = "C:\\Users\\saipranadeep\\Desktop\\JMP_Data\\script check\\wat_combined.jmp";
// --- Script ---
Print("--- Script Start ---");
Print("Attempting to close any existing tables...");
Try( Close( Data Table( "Limits" ), NoSave ) );
Try( Close( Data Table( "wat_combined" ), NoSave ) );
Print("Existing tables closed (if any).");
Print("Opening Limits file: " || limitsFilePath);
dtLimits = Open( limitsFilePath );
Print("Opening Data file: " || dataFilePath);
dtData = Open( dataFilePath );
Print("Checking if tables opened successfully...");
If( Is Empty( dtLimits ), Throw( "Failed to open Limits JMP file: " || limitsFilePath ) );
If( Is Empty( dtData ), Throw( "Failed to open wat_combined JMP file: " || dataFilePath ) );
Print("Limits table opened successfully: " || Char(!Is Empty( dtLimits )) || " (1=Yes, 0=No)");
Print("Data table opened successfully: " || Char(!Is Empty( dtData )) || " (1=Yes, 0=No)");
colName_Test = "Test"; // From Limits file
colName_USL = "USL"; // From Limits file
colName_LSL = "LSL"; // From Limits file
Print("Column names defined: Test='" || colName_Test || "', USL='" || colName_USL || "', LSL='" || colName_LSL || "'");
// --- Ensure 'Test' column is Character type ---
Column( dtLimits, colName_Test ) << Set Data Type( Character );
// --- Create limit maps ---
lslMap = Associative Array();
uslMap = Associative Array();
rowCountLimits = N Row( dtLimits );
Print("Associative maps 'lslMap' and 'uslMap' created.");
// Populate limit maps with valid data from the Limits table
Print( "--- Start Populating Limit Maps (" || Char(rowCountLimits) || " rows total) ---" );
For( i = 1, i <= rowCountLimits, i++,
testNameKey_val = Column( dtLimits, colName_Test )[i];
usl_val = Column( dtLimits, colName_USL )[i];
lsl_val = Column( dtLimits, colName_LSL )[i];
If( Is Missing( usl_val ) | Is Missing( lsl_val ) | Is Missing( testNameKey_val ) | testNameKey_val == "",
Print( "Skipping Row " || Char(i) || " (Missing Data)" );
Next();
);
testNameKey = Char( testNameKey_val ); // Convert to string
lsl_num = Num( lsl_val );
usl_num = Num( usl_val );
If( Is Missing( lsl_num ) | Is Missing( usl_num ),
Print( "Skipping Row " || Char(i) || " (Invalid Numeric Conversion)" );
Next();
);
// Add to maps if valid
lslMap[testNameKey] = lsl_num;
uslMap[testNameKey] = usl_num;
Print( "Added LSL=" || Char(lsl_num) || ", USL=" || Char(usl_num) || " for test '" || testNameKey || "' to maps" );
);
Print( "--- Finished Populating Limit Maps ---" );
// --- Applying Spec Limits ---
Print("--- Applying Spec Limits to Columns ---");
dataCols = dtData << Get Column Names( String );
limitTestNames = lslMap << Get Keys;
appliedCount = 0;
For( i = 1, i <= N Items( dataCols ), i++,
dataColName = dataCols[i];
longestMatchName = ""; // Track the best matching test name
matchFound = 0; // Flag to check if any match is found
For( j = 1, j <= N Items( limitTestNames ), j++,
limitTestName = limitTestNames[j];
If( Contains( Lowercase( Trim( dataColName ) ), Lowercase( Trim( limitTestName ) ) ),
longestMatchName = limitTestName;
matchFound = 1;
);
);
If( matchFound,
lsl = lslMap[longestMatchName];
usl = uslMap[longestMatchName];
If( Is Number(lsl) & Is Number(usl),
// Apply Spec Limits and ensure Graph Reference Lines are shown
Column( dtData, dataColName ) << Set Property(
"Spec Limits",
{LSL( lsl ), USL( usl ), Show Limits( 1 )}
);
appliedCount++;
Print( "Applied limits from [" || longestMatchName || "] to column: [" || dataColName || "] (LSL=" || Char( lsl ) || ", USL=" || Char( usl ) || ")" );
);
);
);
Print( "Applied limits to " || Char(appliedCount) || " columns." );
// --- Save Data Table ---
dtData << Save( "$DESKTOP/JMP_Data/script check/wat_combined_with_limits.jmp" ); // Save table with changes
// --- Final Check ---
Print("Spec limits should now be applied to columns.");
Print("--- Script End ---");
Tronco d'albero:
"--- Script Start ---"
"Attempting to close any existing tables..."
"Existing tables closed (if any)."
"Opening Limits file: C:\\Users\\saipranadeep\\Desktop\\JMP_Data\\script check\\Limits.jmp"
"Opening Data file: C:\\Users\\saipranadeep\\Desktop\\JMP_Data\\script check\\wat_combined.jmp"
"Checking if tables opened successfully..."
"Limits table opened successfully: 1 (1=Yes, 0=No)"
"Data table opened successfully: 1 (1=Yes, 0=No)"
"Column names defined: Test='Test', USL='USL', LSL='LSL'"
"Associative maps 'lslMap' and 'uslMap' created."
"--- Start Populating Limit Maps (4 rows total) ---"
"Added LSL=25, USL=83 for test 'Vtl_P3uL' to maps"
"Added LSL=30, USL=88 for test 'Vtl_P3S' to maps"
"Added LSL=30, USL=36 for test 'Vtl_P3L' to maps"
"Added LSL=26, USL=32 for test 'Vtl_P3eL' to maps"
"--- Finished Populating Limit Maps ---"
"--- Applying Spec Limits to Columns ---"
"Applied limits from [Vtl_P3uL] to column: [Vtl_P3uL] (LSL=25, USL=83)"
"Applied limits from [Vtl_P3S] to column: [Vtl_P3S] (LSL=30, USL=88)"
"Applied limits from [Vtl_P3L] to column: [Vtl_P3L] (LSL=30, USL=36)"
"Applied limits from [Vtl_P3eL] to column: [Vtl_P3eL] (LSL=26, USL=32)"
"Applied limits to 4 columns."
"Spec limits should now be applied to columns."
"--- Script End ---"
problema:
Ciao, ho 2 file (Limits e wat_combined). Il file "limit" contiene i limiti che voglio impostare per lo stesso test nel file "wat_combined" (colonna). Il mio script JSL funziona come previsto, ma l'area dei limiti specifici della colonna non viene aggiunta. Per favore, fammi sapere come risolvere il problema.
Dopo aver dato una rapida occhiata al JSL, ho notato due elementi che potrebbero causare problemi.
- Non conosco alcuna funzione chiamata Next(). La usi un paio di volte nel codice. Immagino che tu voglia usare la funzione Break().
- Around line 110 you are attempting to set the Spec Limits column property. In it you reference the memory variables of usl and lsl. The issue is that the references are within a JMP list {}. JMP lists are not evaluated prior to execution. Therefore, usl and lsl will not be evaluated. The easiest way to get the values evaluated is to use Eval( Evalexpr ())
Eval(
Eval Expr(
Column( dtData, dataColName ) << Set Property(
"Spec Limits",
{LSL( Expr( lsl ) ), USL( Expr( usl ) ), Show Limits( 1 )}
)
)
);
This will force the evaluation prior to actually executing the Set Property
CIAO,
Se riscontri problemi di scripting o preferisci semplicemente una soluzione pronta all'uso, è disponibile un breve tutorial con un componente aggiuntivo JMP che mostra come gestire i limiti delle specifiche e l'analisi della resa senza scrivere JSL:
https://www.youtube.com/watch?v=Nx5jWKAl7Z0
YieldOptiX è progettato per flussi di lavoro di dati di prova e sfrutta la funzionalità di gestione dei limiti delle specifiche di JMP, aggiungendo anche la possibilità di trovare automaticamente i limiti migliori in base ai parametri di distribuzione, sia all'interno che all'esterno dei vincoli predefiniti.
Potrebbe essere utile se stai cercando un approccio più snello.
