783455_it-IT

liliconcom

2024-09-18 JSL nel generatore di grafici

Cercherò di limitare il contenuto principalmente a graph builder ed eviterò script grafici il più possibile. Il lato JMP richiederà circa 25 minuti, quindi ho circa 30-35 minuti.

Alcuni possibili argomenti:

• Esplorazione del livello del report Graph Builder
  • Formato XML
  • Mostra proprietà
  • "Problemi" con Graph Builder come l'accesso ai gruppi X/Y con JSL
• Accesso alle parti di Graph Builder
  • Asse, titoli, FrameBox
• Generatore di grafici in costruzione dinamica
  • Espressioni
  • Aggiungi/Rimuovi Elemento, Aggiungi/Rimuovi Variabile
• Server leggendario
• Aggiungere linee di riferimento ai grafici
  • non-scripting - proprietà colonna limite spec (tabella ampia)
  • non-scripting - colonna (tabella alta)
  • scripting con linee di riferimento
• Etichette passanti
• Esempio di script grafico semplice
• Segmenti di visualizzazione
• Aggiungere immagini

https://www.jmp.com/support/help/en/18.0/#page/jmp/graph-builder-scripts.shtml#

https://www.jmp.com/support/help/en/18.0/#page/jmp/hover-labels.shtml#

I miei suggerimenti via email:

Di seguito alcuni possibili argomenti per la sessione Graph Builder:

• Graph Builder come piattaforma dal punto di vista di JSL
• Utilizzo interattivo di Graph Builder
• Non c'è bisogno di passare sempre e subito al complicato JSL poiché puoi fare molto in modo interattivo + copiare lo script
• Creazione di Graph Builder tramite JSL da colonne di input
• Riferimenti in Graph Builder
• Modifica del generatore di grafici
• Cambiare dinamicamente oggetti/elementi diversi
• Aggiunta di linee di riferimento
• Espressione del generatore di grafici di costruzione
• Gestori dello Stato
• Etichetta di passaggio del mouse
• Filtro dati locali
• Commutatore di colonna
• Stato della riga
• Script grafici (saranno trattati più in dettaglio nella sessione successiva, ma qui è possibile fare una breve introduzione?)
• Suggerimenti e trucchi
• Abbreviazione del codice creato da JMP
• Lasciare che JMP gestisca alcune modifiche durante la modifica del generatore di grafici

Re: 2024-09-18 JSL in Graph Builder

Possibili argomenti (25 min) dal lato JMP (principalmente dimostrazione del funzionamento dell'acquisizione di script nel generatore di grafici)

• Open Graph Builder – salva lo script
• Apri Graph Builder – premi il pulsante Fine – e ridimensiona – salva lo script
• Apri Graph Builder e Big Class, disegna un semplice grafico a dispersione e a linee dell'altezza rispetto al peso: premi Fine - Salva script
• Aggiungi “sesso” al gruppo X – fatto salva script
• Aggiungi “età” alla sovrapposizione – salva lo script
• Rimuovi legenda – salva script
• Apri Graph Builder e Big Class, disegna un semplice grafico a barre sesso/altezza – aggiungi il filtro dati locale “peso” – Salva script
• Aggiungi il commutatore di colonna “Sesso” per “Sesso” ed “Età” – Salva script
• Aggiungi la linea di riferimento sugli assi Y e salva lo script

Re: 2024-09-18 JSL in Graph Builder

Posso aggiungere due frammenti di script su come aggiungere funzionalità a Graph Builder:
A seconda dell'impostazione del filtro, le linee di riferimento sull'asse e una linea aggiunta nel grafico cambiano:

Names Default To Here( 1 );

try(close(dt_big,nosave););
dt_big = Open( "$SAMPLE_DATA/Big Class.jmp" );

try(gb << close window;);
gb = dt_big << Graph Builder(
	Variables( X( :weight ), Y( :height ) ),
	Elements( Points( X, Y, Legend( 7 ) ), Smoother( X, Y, Legend( 8 ) ) ),
	SendToReport(
		Dispatch( {}, "height", ScaleBox,
			{Min( 48 ), Max( 72 ), Inc( 5 )}
		)
	)
);
dtf = gb << Local Data Filter( Add Filter( columns( :sex ), Where( :sex == "F" ) ) );

report(gb)[AxisBox(2)] << Add Ref Line( 52, "Solid", "Red", "LSL", 2 );
report(gb)[frame box(1)] << Add Graphics Script(1,Description(""),Pen Color( "green" );Pen Size( 2 );Line( [60,100, 140], [55,50, 70] ););

gbReport = gb << Report;
rsh = gbReport[OutlineBox(1)] << MakeRowStateHandler(
	report(gb)[frame box(1)]  << Remove Graphics Script(1);
	report(gb)[AxisBox(2)] << remove ref line("LSL");
	selector = dtf <<GET where="" clause=""></GET>

Next is using the wrap function to draw some lines into every plot without the need to find and loop trough all frames:<BR /><BR />

<CODE class=" language-jsl">Names Default To Here( 1 );
dt = Open( "$SAMPLE_DATA/Big Class.jmp" );

delta_t = 0;

Line_Width_add = 2;

//make initial graph
gb = Graph Builder(
	Variables( X( :height ), Y( :weight ) ),
	Elements( Points( X, Y ), Smoother( X, Y ) )
);

//get a reference to the grab builder box
gbb = Report( gb )[Graph Builder Box( 1 )];

Wait( delta_t );

//add a wrap variable to demonstrate adding
gbb << Add Variable( {:age, Role( "Wrap" )} );

Wait( delta_t );

//remove wrap variable
gbb << Remove Variable(  {:age, Role( "Wrap" )});

Wait( delta_t );

//add graphics script
gbb[frame box( 1 )] << Add Graphics Script("Back",
	//2, // 2 is the position within the different plot layers.
	Description( "" ),
	If( Is Empty( g_x4 ),
		g_x4 = [52.92, 68.48, 70.56];
		g_y4 = [119.69, 139.30, 124.01];
	);
	Pen Color( "red" );
	Pen Size( Line_Width_add );
	Drag Line( g_x4, g_y4 );
);

//add wrap variable			
gbb << Add Variable( {:age, Role( "Wrap" )} );

Re: 2024-09-18 JSL in Graph Builder

Prima iterazione di ciò che potrei presentare

Vedi altro...

/*""" JSL in Graph Builder

Author: jthi
Creation Date: 2024-09-18
Creation JMP Version: JMP Pro 18.0.1

This is just a small peak to what can be scripted in graph builder. 
This will also partially overlap with scripting graphs in general

"""*/

Names Default To Here(1);
dt = Open("$SAMPLE_DATA/Big Class.jmp");

stop(); // to prevent script from running to end while still adding here scope



/*""" Improving JMP created script """*/

// JMP created simple graph builder script

// Report snapshot: Big Class - Graph Builder
Data Table("Big Class") << Graph Builder(
	Size(525, 454),
	Show Control Panel(0),
	Variables(X(:weight), Y(:height)),
	Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
);

// Remove unnecessary comment, add reference to your table and store reference to a variable
// Common abbreviation is gb for Graph Builder
gb = dt << Graph Builder(
	Size(525, 454),
	Show Control Panel(0),
	Variables(X(:weight), Y(:height)),
	Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
);



/*""" Dynamically replace single column """*/
// NOTE: I always store my column "referneces" as strings of the column names
// This is most flexible (and robust) option in my opinion, but you will have to know
// how to modify those into other formats if necessary
group_col = "age";
gb = dt << Graph Builder(
	Show Control Panel(0),
	Variables(X(:weight), Y(:height), Page(group_col)),
	Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
);

// Eval() is enough
gb = dt << Graph Builder(
	Show Control Panel(0),
	Variables(X(:weight), Y(:height), Page(Eval(group_col))),
	Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
);


// You can go more complicated route AND sometimes this is helpful (building expressions)
// Usually my preferred method EvalExpr 
gb_expr1 = EvalExpr(
	dt << Graph Builder(
		Show Control Panel(0),
		Variables(X(:weight), Y(:height), Page(Expr(NameExpr(AsColumn(dt, group_col))))),
		Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
	)
);

//but you could use Substitute
gb_expr2 = Substitute(
	Expr(dt << Graph Builder(
		Show Control Panel(0),
		Variables(X(:weight), Y(:height), Page(_groupcol_)),
		Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
	)),
	Expr(_groupcol_), NameExpr(AsColumn(dt, group_col))
);

// Running (you can add Eval before EvalExpr() if you just want to create the graph
gb = Eval(gb_expr1);


// Note: you have already evaluated the expression -> groupcol won't be updated
group_col = "sex";
gb = Eval(gb_expr1);



// Many options how you can handle this, create a function, use expression, ...
gb_expr3 = Expr(EvalExpr(
	dt << Graph Builder(
		Show Control Panel(0),
		Variables(X(:weight), Y(:height), Page(Expr(NameExpr(AsColumn(dt, group_col))))),
		Elements(Points(X, Y, Legend(3)), Smoother(X, Y, Legend(4)))
	)
));
group_col = "age";
gb = Eval(gb_expr3);

group_col = "sex";
gb = Eval(gb_expr3);



/*""" Note: Graph Builder is complicated platform """*/
gb = dt << Graph Builder(
	Size(525, 448),
	Show Control Panel(0),
	Variables(X(:sex)),
	Elements(Bar(X, Legend(3)))
);

Report(gb) << show properties();
Report(gb) << Show Tree Structure;
nw = New Window("gbscript", << type("Script"), << Language("XML"), 
	Report(gb) << Get XML
);


// You might not be able to access everything directly from Graph Builder report
// and you might have to utilize the data table (for example groups)
// If you access the values from table, remember that the order might be different
gb = dt << Graph Builder(
	Size(599, 566),
	Show Control Panel(0),
	Variables(X(:sex), Group X(:age)),
	Elements(Bar(X, Legend(3)))
);

// Report(gb)[GraphBuilderGroupBox(1)] << Select(1);
Report(gb)[GraphBuilderGroupBox(1)] << get xml; // You can try to parse groups from 121314151617age

// Remember data types and ordering
Column(dt, "age") << Set Property(
	"Value Order",
	{Custom Order({17, 16, 15, 14, 13, 12}), Common Order(0)}
);

Summarize(dt, groups1 = By(:age)); /// order considered (at least in this case)
groups2 = Associative Array(Column(dt, "age")) << get keys;  // not considerd

dt_summary = dt << Summary(
	Group(:age),
	Freq("None"),
	Weight("None"),
	Link to original data table(0),
	output table name("Groups"),
	Private
);
groups3 = dt_summary[0, 1];
Close(dt_summary, no save);

show(groups1, groups2, groups3);



/*""" Finding graph builder object from window """*/
// Graph Builder Outline Box text cannot be relied on as it can be changed
// -> Utilize helpKey xml attribute 
// References to outline boxes in current report (could be multiple)
obs = Current Report() << XPath("//OutlineBox[@helpKey = 'Graph Builder']");
gbs = obs << Get Scriptable Object; // references to graph builders

// Full example of looking for single graph builder from current report
obs = Current Report() << XPath("//OutlineBox[@helpKey = 'Graph Builder']");
gbs = obs << Get Scriptable Object; // references to graph builders
If(N Items(obs) < 1,
	Throw("No graph builder found");
);
gb = obs[1] << get scriptable object;
gb << Get Data Table; // ... and so on


/*""" Changing different parts of graph builder """*/
// Changing some things is very simple
dt = Open("$SAMPLE_DATA/Big Class.jmp");

gb = dt << Graph Builder(
	Size(599, 566),
	Show Control Panel(0),
	Variables(X(:sex), Group X(:age)),
	Elements(Bar(X, Legend(3)))
);
gb << Title("MY NEW TITLE"); // Changes the outline box


// How about the text below outline box ("graph title")
gb << Subtitle("Test"); // nope
gb << Show Subtitle(1);

// XPath
tebs = Report(gb) << XPath("//GraphBuilderTitleBox/TextEditBox");
tebs[1] << Set Text("Before subtitle");

// Or report subscripting (I prefer XPath)
Report(gb)[GraphBuilderTitleBox(1), TextEditBox(1)] << Set Text("Before Subtitle2");

// Can also be modified with Dispatch but I don't personally like using these
// The syntax is difficult to understand in my opinion (what is "graph title" for example)
Report(gb) << Dispatch({}, "graph title", TextEditBox, {Set Text("BEFORE SUBTITLE")});

/*
nw = New Window("gbscript", << type("Script"), << Language("XML"), 
	Current Report() << Get XML
);
*/

// AxisBox
dt = Open("$SAMPLE_DATA/Big Class.jmp");

gb = dt << Graph Builder(
	Size(599, 566),
	Show Control Panel(0),
	Variables(X(:sex), Group X(:age)),
	Elements(Bar(X, Legend(3)))
);
// ScaleBox might do same thing (or not) I prefer using AxisBox
rep = Report(gb);



// Axis titles
// Dispatch is easiest option
Report(gb) << Dispatch({}, "Y title", TextEditBox, {Set Text("My Y Axis")});
Report(gb) << Dispatch({}, "X title", TextEditBox, {Set Text("My X Axis")});

// Note: if you have grouping and so on, you will can potentially have multipe frameboxes
// and axisboxes
rep[AxisBox(1)] << Select(1); // First X-axis
rep[AxisBox(2)] << Select(1); // Y-axis
rep[AxisBox(3)] << Select(1); // Second X-axis

// Learn to navigate these
abs = rep << XPath("//AxisBox");
yaxis = Remove From(abs, 2)[1];
yaxis << select(1);
// abs left with just xaxis references

yaxis << Min(-1) << Max(10);
abs << Min(1); // you can check from axis settings how the scale goes for categorical data
// In graph builder "index" starts from 0 but this isn't the same for all platforms
abs << Min(-0.5) << Max(1.5);


// FrameBoxes
dt = Open("$SAMPLE_DATA/Big Class.jmp");

gb = dt << Graph Builder(
	Size(599, 566),
	Show Control Panel(0),
	Variables(X(:sex), Group X(:age)),
	Elements(Bar(X, Legend(3)))
);
// ScaleBox might do same thing (or not) I prefer using AxisBox
rep = Report(gb);
fbs = rep << XPath("//FrameBox");
firstfb = fbs[1];


// If you want to have graphic scripts, you set them to frameboxes
firstfb << Add Graphics Script(
	H Line(3);
);

// Remember that if you use variables, you might want to evalaute them in one way or another
ref = 2;
firstfb << Add Graphics Script(
	H Line(ref);
);
ref = 3;
gb << Reshow;


refy = 1;
Eval(EvalExpr(
	firstfb << Add Graphics Script(
		V Line(Expr(refy));
	);
));
refy = 0;

gb << Reshow;

vals = 1::7;
fbs[2] << Add Graphics Script(
	For(i = 1, i <= N Items(vals), i++,
		H Line(vals[i])
	);
);
gb << reshow;


vals2 = 1::7;
fbs[3] << Add Graphics Script(
	For Each({val}, vals2,
		H Line(val)
	);
);
vals2 = .;
gb << reshow;

vals3 = 1::7;
Eval(EvalExpr(
	fbs[4] << Add Graphics Script(
		myvals = Expr(vals3);
		For Each({val}, myvals,
			H Line(val);
		);
	);
));
gb << reshow;


// Segments might have nice information
// Or you can manipulate graphs through them
gb = dt << Graph Builder(
	Size(525, 454),
	Show Control Panel(0),
	Variables(X(:weight), Y(:height)),
	Elements(
		Points(X, Y, Legend(3)),
		Bar(X, Y, Legend(5))
	)
);

segs = Report(gb)[FrameBox(1)] << Find Segs();
segs << class name;
ms = Report(gb)[FrameBox(1)] << Find Seg(MarkerSeg(1));
xs = ms << Get X Values;
ys = ms << Get Y Values;
// ms << Get Point(1);
// ms << get markers;
// ms << Get Row Numbers; // too bad this doesn't work in graph builder


// Test what happen if you don't utilize rank by using default order or remove [order]
//order = 1::N Items(xs);
order = Rank(xs);
Eval(EvalExpr(
	Report(gb)[FrameBox(1)] << Add Graphics Script(
		Pen Color("Blue");
		Line(Expr(xs[order]), Expr(ys[order]));
	);
));





// Dynamically building graph builder

// Might work as an example
// https://community.jmp.com/t5/JMP-Add-Ins/Column-Quick-Swapper-easily-change-multiple-Y-and-X-axis-columns/ta-p/724616
gb = dt << Graph Builder(
	Size(525, 454),
	Show Control Panel(0),
	Variables(X(:weight), Y(:height)),
	Elements(
		Points(X, Y, Legend(3)),
		Bar(X, Y, Legend(5))
	)
);

gb << Add Variable({:age, Role("Wrap")});
gb << Remove Variable(1);
gb << Remove Variable(1);
gb << Remove Variable(1);
gb << Add Variable({:height, Role("Y")});
gb << Add Variable({:weight, Role("X")});
gb << Add Variable({:weight, Role("X")});
gb << Add Variable({:weight, Role("X"), Position(1)});


// Indices/positions can be very confusing with these
gb << Add Element(1, 1, {Type("Line Of Fit"), X, Y, Degree("Quadratic")});
gb << Remove Element(1, 1, 2);


// Example, we wish to build graph based on user inputs
// We do not know how many Y-axis user provides us with
// but we have static x-axis
dt = Open("$SAMPLE_DATA/Semiconductor Capability.jmp");

// Check what JMP created script would look with 1 and multiple columns
// if you want nested / separeate axis, test that also

// One column
gb = dt << Graph Builder(
	Size(528, 448),
	Show Control Panel(0),
	Variables(X(:SITE), Y(:NPN1)),
	Elements(Points(X, Y, Legend(3)))
);

// Multiple columns in same axis
gb = dt << Graph Builder(
	Show Control Panel(0),
	Variables(X(:SITE), Y(:NPN1), Y(:PNP1, Position(1)), Y(:PNP2, Position(1))),
	Elements(Points(X, Y(1), Y(2), Y(3), Legend(4)))
);

// Separate axis
gb = dt << Graph Builder(
	Show Control Panel(0),
	Variables(X(:SITE), Y(:NPN1), Y(:PNP1), Y(:PNP2)),
	Elements(Position(1, 1), Points(X, Y, Legend(19))),
	Elements(Position(1, 2), Points(X, Y, Legend(20))),
	Elements(Position(1, 3), Points(X, Y, Legend(21)))
);

// Now you have to figure out how to build this
// There are at least two approaches
// Build the expression Or utilize << add variable + << Add element

// Using add variable/element
// With these you can sometimes rely on JMP adding "most" of the script

// Separate Y Axis
// Create initial graph
gb = dt << Graph Builder(
	Size(528, 448),
	Show Control Panel(0),
	Variables(X(:SITE)),
	Elements(Points(X, Y, Legend(3))),
	Invisible
);

ycols = {"NPN1", "NPN2", "NPN3"};
For Each({ycol, idx}, ycols,
	Eval(EvalExpr(
		gb << Add Variable({Expr(NameExpr(AsColumn(dt, ycol))), Role("Y")});
	));
);
gb << reshow;
gb << Show Window(1); // show when ready
wait(0);


// Same Y-axis
gb = dt << Graph Builder(
	Size(528, 448),
	Show Control Panel(0),
	Variables(X(:SITE)),
	Elements(Points(X, Y, Legend(3)))
);

ycols = {"NPN1", "NPN2", "NPN3"};
For Each({ycol, idx}, ycols,
	Eval(EvalExpr(
		gb << Add Variable({Expr(NameExpr(AsColumn(dt, ycol))), Role("Y"), Position(1)});
	));
);


// Building expression
variables_expr = Expr(Variables(X(:SITE)));
For Each({ycol, idx}, ycols,
	cur_expr = Eval Expr(Y(Expr(Name Expr(AsColumn(dt, ycol)))));
	Insert Into(variables_expr, Name Expr(cur_expr));
);
show(variables_expr);

Eval(Substitute(
	Expr(gb = dt << Graph Builder(
		Size(528, 448),
		Show Control Panel(0),
		_variables_
	)),
	Expr(_variables_), Name Expr(variables_expr)
));

// This works as points is the default in graph builder
// but usually you want to build it further. Example with different same axis

/*
gb = dt << Graph Builder(
	Show Control Panel(0),
	Variables(X(:SITE), Y(:NPN1), Y(:NPN2, Position(1)), Y(:NPN3, Position(1))),
	Elements(Line(X, Y(1), Y(2), Y(3), Legend(4)))
);
*/

ycols = {"NPN1", "NPN2", "NPN3", "NPN4", "NPN5"};


variables_expr = Expr(Variables(X(:SITE)));
lines_expr = Expr(Line(X));

For Each({ycol, idx}, ycols,
	cur_expr = Eval Expr(Y(Expr(Name Expr(AsColumn(dt, ycol))), Position(1)));
	Insert Into(variables_expr, Name Expr(cur_expr));
	
	cur_expr2 = Eval Expr(Y(Expr(idx)));
	Insert Into(lines_expr, Name Expr(cur_expr2));
);


Eval(Substitute(
	Expr(gb = dt << Graph Builder(
		Size(528, 448),
		Show Control Panel(0),
		_variables_,
		Elements(_lines_)
	)),
	Expr(_variables_), Name Expr(variables_expr),
	Expr(_lines_), Name Expr(lines_expr)
));


// One example from community
Web("https://community.jmp.com/t5/The-Plot-Thickens/Reply-All-How-to-script-dynamic-content-for-Graph-Builder/ba-p/21092", JMP Window);


// There are a lot of tricks related to these but there is not time to start covering these in this session
// The documentation is also very lacking for these...
// Check GraphBuilderBox / Graph Builder function from scripting index for some possibilities
Open Help(
	"Scripting Index",
	Search(Term("Graph Builder"), Match({"Contains Terms", "Match All Terms", "Ignore Case"})),
	IndexContext(
		Category("All Categories"),
		Object("Search results"),
		Method("Add Element")
	)
);




// manipulating graph builder
dt = Open("$SAMPLE_DATA/Big Class.jmp");
gb = dt << Graph Builder(
	Variables(X(:height), Y(:weight)),
	Elements(Points(X, Y), Smoother(X, Y))
);
// Changing summary statistic
gb << Update Element(1, 1, 1, {Summary Statistic("Mean"), Error Bars("Range")});


// Sometimes you might want to manipulate directly from UI
cbs = Report(gb) << XPath("//ComboBox");
cbs[1] << get items;
cbs[1] << Set(2); // Set summary statistic to "N" (second option)
cbs[1] << Set(Contains(cbs[1] << get items, "Mean")); 



// One of the most asked question in JMP Community
// Adding lines to your plots
// Some of these methods apply to more than graph builder but not all
dt = Open("$SAMPLE_DATA/Big Class.jmp");

// Very simple example
gb = dt << Graph Builder(
	Size(525, 490),
	Show Control Panel(0),
	Variables(X(:age), Y(:height), Group X(:sex)),
	Elements(Points(X, Y, Legend(1)))
);
// different height "limits" for F and M
aa_limits = ["F" => {50, 65}, "M" => {55, 70}];


// You don't always have to rely on scripting, easiest option (depending on your data)
// is to utilize the data table. For Wide/Split data you might be able to utilize spec limits
// For tall data add line to your chart
newcol1 = dt << New Column("Low", Numeric, Continuous, Formula(
	aa_limits[:sex][1];
));
newcol2 = dt << New Column("High", Numeric, Continuous, Formula(
	aa_limits[:sex][2];
));
dt << run formulas;
newcol1 << Delete Formula;
newcol2 << Delete Formula;

// Note how Variables have been set in Points and Line
gb = dt << Graph Builder(
	Size(570, 762),
	Variables(
		X(:age),
		Y(:height),
		Y(:Low, Position(1)),
		Y(:High, Position(1)),
		Group X(:sex)
	),
	Elements(Points(X, Y(1), Legend(1)), Line(Y(2), Y(3), Legend(4))),
	SendToReport(
		Dispatch({"Points"}, "", OutlineBox, {Close(0)}),
		Dispatch({"Line"}, "", OutlineBox, {Close(0)})
	)
);
// Great thing with this is that it supports easily multiple types of graphs
// and works with local data filter easily

// You can also use Caption to create lines but it might not work that well with X-group


// Scripting - use ref lines
dt = Open("$SAMPLE_DATA/Big Class.jmp");

gb = dt << Graph Builder(
	Size(525, 744),
	Show Control Panel(0),
	Variables(
		X(:age),
		Y(:height),
		Page(:sex)
	),
	Elements(Points(X, Y(1), Legend(1)))
);
// different height "limits" for F and M
aa_limits = ["F" => {50, 65}, "M" => {55, 70}];

// We have multiple graphs (we used Page)
Summarize(dt, groups = By(:sex));
fbs = gb << XPath("//AxisBox");
yaxes = fbs[2::N Items(fbs)::2];

For Each({yaxis, idx}, yaxes,
	vals = aa_limits[groups[idx]];
	yaxis << Add Ref Line(vals[1], "Dashed", "Red", "low", 1);
	yaxis << Add Ref Line(vals[2], "Dashed", "Red", "high", 1);
);

// Scripting - use graphic script
// With multiple frame boxes and groups, this can quickly get quite complicated
gb = dt << Graph Builder(
	Size(525, 490),
	Show Control Panel(0),
	Variables(X(:age), Y(:height), Group X(:sex)),
	Elements(Points(X, Y, Legend(1)))
);
aa_limits = ["F" => {50, 65}, "M" => {55, 70}];

dt_groups = dt<< Summary(
	Group(:sex),
	N Categories(:age),
	Freq("None"),
	Weight("None"),
	Link to original data table(0),
	output table name("groups"),
	invisible
);

groups = dt_groups[0, [1 3]];
Close(dt_groups, no save);

fbs = gb << XPath("//FrameBox");

total_groups = 0;
For Each({fb, idx}, fbs,
	Eval(EvalExpr(
		fb << Add Graphics Script(
			limits = Expr(aa_limits[groups[idx][1]]);
			start_group = 0;
			total_groups = start_group + Expr(groups[idx][2]);
			Pen Color("Red");
			Line({start_group - 1, limits[1]}, {total_groups, limits[1]});
			Pen Color("Blue");
			Line({start_group - 1, limits[2]}, {total_groups, limits[2]});
		);
	));
);


// Variability charts and lines for more examples 
Web("https://community.jmp.com/t5/Discussions/Add-Reference-Lines-to-multiple-Variability-Charts-in-a-Column/td-p/722908", JMP Window);
Web("https://community.jmp.com/t5/Discussions/different-spec-limits-on-a-variability-chart/td-p/565177", JMP Window);
Web("https://community.jmp.com/t5/Discussions/Varying-spec-limits-by-data-category-in-variability-chart/td-p/723027", JMP Window);




/*""" Not covered due to time limitations """*/
// Local Data Filter
	// Can cause some issues as frameboxes are rebuilt, 
	Web("https://community.jmp.com/t5/Discussions/How-to-set-a-Reference-Line-on-each-page-with-Page-option-in/m-p/798517", "JMP Window");
// Column Switcher
// Hover Label
	Web("https://www.jmp.com/support/help/en/18.0/index.shtml#page/jmp/work-with-the-hover-label-execution-context.shtml#ww599987");
// Legend Server
// Different state handlers
// Setting images to graph

Write();

Molti argomenti non li tratterò a causa del poco tempo a disposizione e della complessità della piattaforma Graph Builder. Ho cercato di mantenerlo principalmente specifico per Graph Builder, ma alcune di queste tecniche funzionano benissimo anche per altri grafici