674216_de-DE

liliconcom

Verwenden von Parse in include

Hallo,

Ich versuche, die Liste zu durchlaufen und die Werte aus der summary_tb in die Listen L1, L2, L3 zu übertragen, sofern sie in den Listen 1,2,3,4 enthalten sind. Ich bleibe bei Prase(lists[j]) hängen. Irgendein Rat? Danke

 

 

dt = Open( "$SAMPLE_DATA/Semiconductor Capability.jmp" );

List1 = {"NPN1", "PNP1", "PNP2", "NPN2", "PNP3", "IVP1"};
List2 = {"PNP4", "NPN3", "IVP2", "NPN4", "SIT1"};
List3 = {"INM1", "INM2", "VPM1", "VPM2", "VPM3"};
List4 = {"SNM1", "SPM1", "NPN5", "EP2", "ZD6"};

summary_tb = (Data Table( "Semiconductor Capability" ) << Tabulate(
 Add Table(
  Column Table( Statistics( N, Mean, Std Dev ) ),
  Row Table(
   Analysis Columns(
    :NPN1, :PNP1, :PNP2, :NPN2, :PNP3, :IVP1, :PNP4, :NPN3, :IVP2, :NPN4, :SIT1, :INM1, :INM2, :VPM1, :VPM2, :VPM3, :PMS1, :SNM1, :SPM1,
    :NPN5, :EP2, :ZD6, :PBA, :PLG, :CAP, :PBA3, :PLG2, :PNP5, :NPN6, :PNP6, :PNP7, :NPN7, :PNP8, :IVP3, :IVP4, :IVP5, :IVP6, :PNP9, :NPN8,
    :NPN9, :IVP7, :NPN10, :N_1, :PBA1, :WPR1, :B10, :PLY10, :VBE210, :VTN210, :VTP210, :SIT2, :SIT3, :INV2, :INV3, :INV4, :INV5, :FST1,
    :FST2, :RES1, :RES2, :PNM1, :PPM1, :FNM1, :FPM1, :FST3, :FST4, :RES3, :RES4, :A1, :B1, :A2N, :A2P, :A2P1, :IVP8, :IVP9, :DE_H1,
    :NF_H1, :ESM1, :ESM2, :ESP1, :YFU1, :VPM4, :PBA2, :PBB1, :LYA1, :LYB1, :DEM1, :DEP1, :NFM1, :PLY1, :VDP1, :VDP2, :SNW1, :RSP2, :PLY2,
    :RSP1, :VDP3, :PBL1, :PLG1, :VDP4, :SPW1, :VIA1, :INM3, :VPM5, :VPM6, :INM4, :VPM7, :M1_M1, :M2_M2, :P1_P1, :E2A1, :E2B1, :NPN11,
    :IVP10, :PNP10, :INM5, :VPM8, :VPM9, :INM6, :VPM10, :N2A1, :N2B1, :NM_L1, :P2A1, :P2B1, :PM_L1, :P1, :M1
   )
  )
 )
)) << Make Into Data Table;

lists = {"List1", "List2", "List3", "List4"};<BR />
///Get values from the below loop into these lists
L1 = {};
L2 = {};
L3 = {};<BR /><BR />// Loop to iterate rows and lists to find the column values from the tabulate table
For( i = 1, i <= N Rows( summary_tb ), i++,
 For( j = 1, j <= N Items( lists ), j++,

//// Something is not correct in the below code
  If( Contains( Parse (lists[j]) ,Column( summary_tb, 1 )[i]), 
      
   Insert Into( L1, Column( summary_tb, 1 )[i] );
   Insert Into( L2, Column( summary_tb, 2 )[i] );
   Insert Into( L3, Column( summary_tb, 3 )[i] );
  )
 )
);

Automatisierung und SkripterstellungBetreff: Parse in „Contain“ verwenden

Ich konnte das von Ihnen angegebene Ergebnis mithilfe der Substitute-Funktion erhalten

lists = {"List1", "List2", "List3", "List4"};
///Get values from the below loop into these lists
L1 = {};
L2 = {};
L3 = {};// Loop to iterate rows and lists to find the column values from the tabulate table
For( i = 1, i <= N Rows( summary_tb ), i++,
 For( j = 1, j <= N Items( lists ), j++, 

//// Something is not correct in the below code
  Eval(
   Substitute(
     Expr(
      If( Contains( __lists__, Column( summary_tb, 1 )[i] ), 
      
       Insert Into( L1, Column( summary_tb, 1 )[i] );
       Insert Into( L2, Column( summary_tb, 2 )[i] );
       Insert Into( L3, Column( summary_tb, 3 )[i] );
      )
     ),
    Expr( __lists__ ), Parse( lists[j] )
   )
  )
 )
);

Betreff: Parse in „Contain“ verwenden

Danke Jim!

Betreff: Parse in „Contain“ verwenden

@txnelson

Kurze Frage: Ich möchte die Werte im Tab-Feld für jede Liste abrufen

Zum Beispiel,

Das erste Tab-Feld sollte die folgenden zusammenfassenden Statistiken enthalten

List1 = {"NPN1", "PNP1", "PNP2", "NPN2", "PNP3", "IVP1"};

Das zweite Tab-Feld sollte die folgenden zusammenfassenden Statistiken enthalten
List2 = {"PNP4", "NPN3", "IVP2", "NPN4", "SIT1"};

Ebenso für 3 und 4

Ich habe versucht, die Set-Funktion zu verwenden, aber sie kopiert alle Spalten in einer Registerkarte. Irgendwelche Vorschläge?

 

 

dt = Open( "$SAMPLE_DATA/Semiconductor Capability.jmp" );

List1 = {"NPN1", "PNP1", "PNP2", "NPN2", "PNP3", "IVP1"};
List2 = {"PNP4", "NPN3", "IVP2", "NPN4", "SIT1"};
List3 = {"INM1", "INM2", "VPM1", "VPM2", "VPM3"};
List4 = {"SNM1", "SPM1", "NPN5", "EP2", "ZD6"};

summary_tb = (Data Table( "Semiconductor Capability" ) << Tabulate(
 Add Table(
  Column Table( Statistics( N, Mean, Std Dev ) ),
  Row Table(
   Analysis Columns(
    :NPN1, :PNP1, :PNP2, :NPN2, :PNP3, :IVP1, :PNP4, :NPN3, :IVP2, :NPN4, :SIT1, :INM1, :INM2, :VPM1, :VPM2, :VPM3, :PMS1, :SNM1, :SPM1,
    :NPN5, :EP2, :ZD6, :PBA, :PLG, :CAP, :PBA3, :PLG2, :PNP5, :NPN6, :PNP6, :PNP7, :NPN7, :PNP8, :IVP3, :IVP4, :IVP5, :IVP6, :PNP9, :NPN8,
    :NPN9, :IVP7, :NPN10, :N_1, :PBA1, :WPR1, :B10, :PLY10, :VBE210, :VTN210, :VTP210, :SIT2, :SIT3, :INV2, :INV3, :INV4, :INV5, :FST1,
    :FST2, :RES1, :RES2, :PNM1, :PPM1, :FNM1, :FPM1, :FST3, :FST4, :RES3, :RES4, :A1, :B1, :A2N, :A2P, :A2P1, :IVP8, :IVP9, :DE_H1,
    :NF_H1, :ESM1, :ESM2, :ESP1, :YFU1, :VPM4, :PBA2, :PBB1, :LYA1, :LYB1, :DEM1, :DEP1, :NFM1, :PLY1, :VDP1, :VDP2, :SNW1, :RSP2, :PLY2,
    :RSP1, :VDP3, :PBL1, :PLG1, :VDP4, :SPW1, :VIA1, :INM3, :VPM5, :VPM6, :INM4, :VPM7, :M1_M1, :M2_M2, :P1_P1, :E2A1, :E2B1, :NPN11,
    :IVP10, :PNP10, :INM5, :VPM8, :VPM9, :INM6, :VPM10, :N2A1, :N2B1, :NM_L1, :P2A1, :P2B1, :PM_L1, :P1, :M1
   )
  )
 )
)) << Make Into Data Table;

lists = {"List1", "List2", "List3", "List4"};

L1 = {};
L2 = {};
L3 = {};

For( i = 1, i <= N Rows( summary_tb ), i++,
 For( j = 1, j <= N Items( lists ), j++, 

//// Something is not correct in the below code
  Eval(
   Substitute(
     Expr(
      If( Contains( __lists__, Column( summary_tb, 1 )[i] ), 
      
       Insert Into( L1, Column( summary_tb, 1 )[i] ); // Test
       Insert Into( L2, Column( summary_tb, 2 )[i] ); // N<BR />
       Insert Into( L3, Column( summary_tb, 3 )[i] );// Mean
       Insert Into( L4, Column( summary_tb, 3 )[i] ); // Std
      )
     ),
    Expr( __lists__ ), Parse( lists[j] )
   )
  )
 )
);

Nw = New Window( "", 
 
 
 Tab Box(
  "1", 
  
  V List Box(
   
   tbb = Table Box(
    tests = String Col Edit Box( "Tests", {} ),
    num = Number Col Edit Box( "N", {}, <<SET format=""></SET>num<< set(L2);<BR />mean1<< set(L3);<BR />std<< set(L4);<BR />

 

 

Betreff: Parse in „Contain“ verwenden

Die Variablen „Tests“, „num“, „mean1“ und „std“ werden ständig von den Anzeigeobjekten in Tab 1 zu Tab 2......Tab 4 geändert. Wenn Sie Ihre <

dt = Open( "$SAMPLE_DATA/Semiconductor Capability.jmp" );

List1 = {"NPN1", "PNP1", "PNP2", "NPN2", "PNP3", "IVP1"};
List2 = {"PNP4", "NPN3", "IVP2", "NPN4", "SIT1"};
List3 = {"INM1", "INM2", "VPM1", "VPM2", "VPM3"};
List4 = {"SNM1", "SPM1", "NPN5", "EP2", "ZD6"};

summary_tb = (Data Table( "Semiconductor Capability" ) << Tabulate(
 Add Table(
  Column Table( Statistics( N, Mean, Std Dev ) ),
  Row Table(
   Analysis Columns(
    :NPN1, :PNP1, :PNP2, :NPN2, :PNP3, :IVP1, :PNP4, :NPN3, :IVP2, :NPN4, :SIT1, :INM1, :INM2,
    :VPM1, :VPM2, :VPM3, :PMS1, :SNM1, :SPM1, :NPN5, :EP2, :ZD6, :PBA, :PLG, :CAP, :PBA3, :PLG2,
    :PNP5, :NPN6, :PNP6, :PNP7, :NPN7, :PNP8, :IVP3, :IVP4, :IVP5, :IVP6, :PNP9, :NPN8, :NPN9,
    :IVP7, :NPN10, :N_1, :PBA1, :WPR1, :B10, :PLY10, :VBE210, :VTN210, :VTP210, :SIT2, :SIT3,
    :INV2, :INV3, :INV4, :INV5, :FST1, :FST2, :RES1, :RES2, :PNM1, :PPM1, :FNM1, :FPM1, :FST3,
    :FST4, :RES3, :RES4, :A1, :B1, :A2N, :A2P, :A2P1, :IVP8, :IVP9, :DE_H1, :NF_H1, :ESM1, :ESM2,
    :ESP1, :YFU1, :VPM4, :PBA2, :PBB1, :LYA1, :LYB1, :DEM1, :DEP1, :NFM1, :PLY1, :VDP1, :VDP2,
    :SNW1, :RSP2, :PLY2, :RSP1, :VDP3, :PBL1, :PLG1, :VDP4, :SPW1, :VIA1, :INM3, :VPM5, :VPM6,
    :INM4, :VPM7, :M1_M1, :M2_M2, :P1_P1, :E2A1, :E2B1, :NPN11, :IVP10, :PNP10, :INM5, :VPM8,
    :VPM9, :INM6, :VPM10, :N2A1, :N2B1, :NM_L1, :P2A1, :P2B1, :PM_L1, :P1, :M1
   )
  )
 )
)) << Make Into Data Table;

lists = {"List1", "List2", "List3", "List4"};

L1 = {};
L2 = {};
L3 = {};
L4 = {};

For( i = 1, i <= N Rows( summary_tb ), i++,
 For( j = 1, j <= N Items( lists ), j++, 

//// Something is not correct in the below code
  Eval(
   Substitute(
     Expr(
      If( Contains( __lists__, Column( summary_tb, 1 )[i] ), 
      
       Insert Into( L1, Column( summary_tb, 1 )[i] ); // Test
       Insert Into( L2, Column( summary_tb, 2 )[i] ); // N
       Insert Into( L3, Column( summary_tb, 3 )[i] );// Mean
       Insert Into( L4, Column( summary_tb, 3 )[i] ); // Std
      )
     ),
    Expr( __lists__ ), Parse( lists[j] )
   )
  )
 )
);

Nw = New Window( "", 
 
 
 Tab Box(
  "1", 
  
  V List Box(
   
   tbb1 = Table Box(
    tests1 = String Col Edit Box( "Tests", {} ),
    num1 = Number Col Edit Box( "N", {}, <<SET format=""></SET>