繪製WAT輪廓時如何實現多組X批量繪製：
輪廓平台規定X只能選兩列，但是我有多組X需要匹配一個Y
這是顯示等高線圖的嘗試。複雜性在於找到匹配的列。列名不一致。下面的腳本說明了您需要做的事情，以更好地匹配列。該腳本已被註釋，以便更好地理解用於嘗試匹配的內容
Names Default To Here( 1 );
dt = Data Table( "WAT_Contour" );
// Build list of columns to be graphed
headerTypeList = {};
colNameList = {}; // The full name of the column
deviceTypeList = {}; // The P or N
commonNameList = {}; // The items that are common between P and N columns
// Loop across all columns to find target columns
// The code here is a best guess on determining the items needed to be able
// to match up the columns. There are inconsistancies in the column names,
// between VTSAT and VTHSAT etc. and also within a single type like VTSAT
// This section will need to be worked out to get all of the matches
For( i = 1, i <= N Col( dt ), i++,
colName = Trim( Column( dt, i ) << get name );
If(
Word( 1, colName, "_" ) == "VTSAT",
Insert Into( headerTypeList, "VTSAT" );
Insert Into( colNameList, colName );
If( Word( 2, colName, "_" ) == "N" | Word( 2, colName, "_" ) == "P",
Insert Into( deviceTypeList, Word( 2, colName, "_" ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colNameList[N Items( colNameList )], "_" ) )
+Length( Word( 2, deviceTypeList[N Items( deviceTypeList )], "_" ) ) + 4
)
);
,
Insert Into( deviceTypeList, Substr( Word( 3, colName, "_" ), 1, 1 ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colName, "_" ) ) + Length( Word( 2, colName, "_" ) )
+Length( Word( 3, colName, "_" ) ) + 4
)
);
);,
Word( 1, colName, "_" ) == "VTHSAT",
Insert Into( headerTypeList, "VTHSAT" );
Insert Into( colNameList, colName );
Insert Into( deviceTypeList, Substr( Word( 3, colName, "_" ), 1, 1 ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colName, "_" ) ) + Length( Word( 2, colName, "_" ) )
+Length( Word( 3, colName, "_" ) ) + 4
)
);
);
);
dtNames = New Table( "Names",
New Column( "Header", character, values( headerTypeList ) ),
New Column( "Column Name", character, values( colNameList ) ),
New Column( "Device Type", character, values( deviceTypeList ) ),
New Column( "Common", character, values( commonNameList ) )
);
// Split data table to get columns that match
dtSplit = dtNames << Split(
Split By( :Device Type ),
Split( :Column Name ),
Group( :Header, :Common ),
Sort by Column Property
);
// Delete non matching rows
dtSplit << select where(:P == "" | :N == "" );
dtSplit << delete rows;
// Create the Contour Maps
New Window( "Contour Maps", lub = Lineup Box( N Col( 3 ) ) );
// Loop across matches
For( i = 1, i <= N Rows( dtSplit ), i++,
lub << append(
dt << Contour Plot(
X( Column( dt, dtSplit:N[i] ), Column( dt, dtSplit:P[i] ) ),
Y( :"W/C BSCAN VMIN YIELD"n ),
Show Data Points( 0 ),
Fill Areas( 0 ),
Label Contours( 0 ),
Transform( "Range Normalized" ),
Specify Contours( Min( 0.5 ), Max( 0.9 ), N( 5 ) )
)
)
);
// Clean up the data tables no longer needed.
// Uncomment the below lines when having the interium tables
// no longer need to be displayed
// close( dtNames, nosave );
// close( dtSplit, nosave );
謝謝您的回复，附件是我的原始數據，主要包括yield列，還有很多X列，我需要繪製等高線圖，即X軸是N設備，Y軸是P設備，Yield為Z ，對於單個設備我可以輕鬆繪製等高線圖，但我一次只能繪製一張地圖，我想一次繪製所有計數地圖。
如果問題是匹配 N 與 P 列，則腳本可以生成該結果。這是我找到的匹配項。
我已附上數據表以及我提出的完整列表。
如果我走對了路，您能提供您正在尋找的其中一對的圖形嗎？
感謝您的回复，我嘗試過採用這種方法，但是我有很多X列，如下表所示，我無法通過N設備匹配P設備來堆疊它，例如VTHSAT_PCM09A_NULVT_P63_D0715_D011_(V)_MEDIAN 至 VTHSAT_PCM10D_PULVT_P63_SDB_D0715_D011_(V)_MEDIAN，
因為我想找到哪個設備與我的產量相關，我需要按設備繪製輪廓，所以我想快速繪製所有設備輪廓。可以通過創建或編輯輪廓腳本來實現嗎？
| VTHSAT_PCM06F_PULVT_P63_D0715_D242_(V)_MEDIAN |
| VTHSAT_PCM06G_PULVT_P63_D607_D242_(V)_MEDIAN |
| VTHSAT_PCM06H_PULVT_P63_SDB_D04_D009_(V)_MEDIAN |
| VTHSAT_PCM09A_NULVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09B_NLVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09C_NSVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09D_PULVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09E_PLVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09F_PSVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09G_NLVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM09H_PLVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10A_NSVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10B_NULVT_P63_SDB_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM10C_PSVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10D_PULVT_P63_SDB_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM10E_NSVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10F_NULVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10G_PSVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10H_PULVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM15A_NLVT_P79_D04_D009_(V)_MEDIAN |
| VTHSAT_PCM15B_NLVT_P79_D0715_D009_(V)_MEDIAN |
