绘制WAT轮廓时如何实现多组X批量绘制：
轮廓平台规定X只能选两列，但是我有多组X需要匹配一个Y
这是显示等高线图的尝试。复杂性在于找到匹配的列。列名不一致。下面的脚本说明了您需要做的事情，以更好地匹配列。该脚本已被注释，以便更好地理解用于尝试匹配的内容
Names Default To Here( 1 );
dt = Data Table( "WAT_Contour" );
// Build list of columns to be graphed
headerTypeList = {};
colNameList = {}; // The full name of the column
deviceTypeList = {}; // The P or N
commonNameList = {}; // The items that are common between P and N columns
// Loop across all columns to find target columns
// The code here is a best guess on determining the items needed to be able
// to match up the columns. There are inconsistancies in the column names,
// between VTSAT and VTHSAT etc. and also within a single type like VTSAT
// This section will need to be worked out to get all of the matches
For( i = 1, i <= N Col( dt ), i++,
colName = Trim( Column( dt, i ) << get name );
If(
Word( 1, colName, "_" ) == "VTSAT",
Insert Into( headerTypeList, "VTSAT" );
Insert Into( colNameList, colName );
If( Word( 2, colName, "_" ) == "N" | Word( 2, colName, "_" ) == "P",
Insert Into( deviceTypeList, Word( 2, colName, "_" ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colNameList[N Items( colNameList )], "_" ) )
+Length( Word( 2, deviceTypeList[N Items( deviceTypeList )], "_" ) ) + 4
)
);
,
Insert Into( deviceTypeList, Substr( Word( 3, colName, "_" ), 1, 1 ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colName, "_" ) ) + Length( Word( 2, colName, "_" ) )
+Length( Word( 3, colName, "_" ) ) + 4
)
);
);,
Word( 1, colName, "_" ) == "VTHSAT",
Insert Into( headerTypeList, "VTHSAT" );
Insert Into( colNameList, colName );
Insert Into( deviceTypeList, Substr( Word( 3, colName, "_" ), 1, 1 ) );
Insert Into(
commonNameList,
Substr(
colName,
Length( Word( 1, colName, "_" ) ) + Length( Word( 2, colName, "_" ) )
+Length( Word( 3, colName, "_" ) ) + 4
)
);
);
);
dtNames = New Table( "Names",
New Column( "Header", character, values( headerTypeList ) ),
New Column( "Column Name", character, values( colNameList ) ),
New Column( "Device Type", character, values( deviceTypeList ) ),
New Column( "Common", character, values( commonNameList ) )
);
// Split data table to get columns that match
dtSplit = dtNames << Split(
Split By( :Device Type ),
Split( :Column Name ),
Group( :Header, :Common ),
Sort by Column Property
);
// Delete non matching rows
dtSplit << select where(:P == "" | :N == "" );
dtSplit << delete rows;
// Create the Contour Maps
New Window( "Contour Maps", lub = Lineup Box( N Col( 3 ) ) );
// Loop across matches
For( i = 1, i <= N Rows( dtSplit ), i++,
lub << append(
dt << Contour Plot(
X( Column( dt, dtSplit:N[i] ), Column( dt, dtSplit:P[i] ) ),
Y( :"W/C BSCAN VMIN YIELD"n ),
Show Data Points( 0 ),
Fill Areas( 0 ),
Label Contours( 0 ),
Transform( "Range Normalized" ),
Specify Contours( Min( 0.5 ), Max( 0.9 ), N( 5 ) )
)
)
);
// Clean up the data tables no longer needed.
// Uncomment the below lines when having the interium tables
// no longer need to be displayed
// close( dtNames, nosave );
// close( dtSplit, nosave );
谢谢您的回复，附件是我的原始数据，主要包括yield列，还有很多X列，我需要绘制等高线图，即X轴是N设备，Y轴是P设备，Yield为Z ，对于单个设备我可以轻松绘制等高线图，但我一次只能绘制一张地图，我想一次绘制所有计数地图。
如果问题是匹配 N 与 P 列，则脚本可以生成该结果。这是我找到的匹配项。
我已附上数据表以及我提出的完整列表。
如果我走对了路，您能提供您正在寻找的其中一对的图形吗？
感谢您的回复，我尝试过采用这种方法，但是我有很多X列，如下表所示，我无法通过N设备匹配P设备来堆叠它，例如VTHSAT_PCM09A_NULVT_P63_D0715_D011_(V)_MEDIAN 至 VTHSAT_PCM10D_PULVT_P63_SDB_D0715_D011_(V)_MEDIAN，
因为我想找到哪些设备与我的产量相关，我需要按设备绘制轮廓，所以我想快速绘制所有设备轮廓。可以通过创建或编辑轮廓脚本来实现吗？
| VTHSAT_PCM06F_PULVT_P63_D0715_D242_(V)_MEDIAN |
| VTHSAT_PCM06G_PULVT_P63_D607_D242_(V)_MEDIAN |
| VTHSAT_PCM06H_PULVT_P63_SDB_D04_D009_(V)_MEDIAN |
| VTHSAT_PCM09A_NULVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09B_NLVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09C_NSVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09D_PULVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09E_PLVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09F_PSVT_P63_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM09G_NLVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM09H_PLVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10A_NSVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10B_NULVT_P63_SDB_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM10C_PSVT_P63_SDB_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10D_PULVT_P63_SDB_D0715_D011_(V)_MEDIAN |
| VTHSAT_PCM10E_NSVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10F_NULVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10G_PSVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM10H_PULVT_P63_D04_D011_(V)_MEDIAN |
| VTHSAT_PCM15A_NLVT_P79_D04_D009_(V)_MEDIAN |
| VTHSAT_PCM15B_NLVT_P79_D0715_D009_(V)_MEDIAN |
