394613_en-US

liliconcom

JMP Public posting format changes

Myself, @scwise , and a customer have run into some issues when posting to JMP Public (customer is purchasing Live and posting dummy data to Public in the interim*). A few issues are occurring simultaneously:

1. Prior to uploading the customer builds a dashboard (bar chart w/ labels) and despite the number of decimals being set in the table (2) the labels are not following suit (circles in Figure 1). 

2. When published to JMP Public the decimals reformat so all labels show 4 decimals (circles in Figure 2), despite the pre-published graph showing 1 or 2 decimals and the table properties set at 2 decimals. 

3. Prior to publishing the sub title is centered (arrow in Figure 1) on the graph but once published it is left justified (arrow in Figure 2).

This problem occurs when posting to Public and Live and on both a Mac and PC.

Any thoughts on if/how these can be addressed? A pre-emptive Thank You.

Fig 1.

Fig 2.

Re: JMP Public posting format changes

I think that the bar labels will respect the settings in the relevant axis, in this case the Y axis (even though you are not displaying axis values). Does it fix the labels if you change the number of decimals in the axis settings?

Re: JMP Public posting format changes

@Jordan_Hiller unfortunately no it does not have an affect on the dashboard display. Interestingly, when I set the number of decimals using the axis settings then publish to JMP Live, it displays the number of decimals I enter + 3—When I set to 0, I get 3 decimals in Live, set to 1, I get 4 on Live, etc.