nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

How do I select specific rows?

micromoccia

I am getting more than the selected data from this line:

get_generic(RawDataTable,"nS","Voltage","tHIGH",,400) ;

I am also getting all of this data:

get_generic(RawDataTable,"nS","Voltage","tHIGH_hs",,60) ;

My problem is that tHIGH is pulling every row with tHIGH, including the tHIGH_hs.

I need to know if I can reject the tHIGH_hs in the first line of code?

They are different speeds of operation for the test, and I need to produce separate charts for performance.

When I pull the tHIGH_hs data it filters only high speed. I just need to make a chart for low speed without including the high spped.

Thanks!!

Accepted answers

All comments

Jeff_Perkinson

It looks like you might be using a custom function here. There is no built-in JSL function get_generic(), so we're not going to be able to help with why it's not doing what you expect.

Was the script written by you or are you using a script that someone else wrote?

micromoccia

I inherited the script at a new job. The sctirpt pulls any data that has tHIGH in the name. which is unfortunate when I don't want the other tHIGH_hs data.

Jeff_Perkinson

In that case we'll need to know more about the function definition for get_generic() to see how it's using the arguments internally.

Are you familiar with JSL? Or is this your first time looking at it?

micromoccia

I am becoming familiar. lol

Here is the block of code. It is used to create a pdf that charts the data in time vs voltage. tHIGH is normal operating speed and tHIGH_hs is the high speed operating data. I can isolate the high speed data by changing the code to "tHIGH_hs", and did in another section of the script.

I'm trying to get just the normal operating speed data for this section.

// set up for AC report
win1 = New Window( "Char Report_NS" );
// real spec is 1000KHz
// data table, scale of desired units, by, name, lsl, usl
get_generic( RawDataTable, "V", "Frequency", "fSCL", , 1.7 );
// tHigh = 260nS, tLow = 500nS
// rewrite -- maybe a generic for each??
//get_thighlow(RawDataTable,"nS","tHIGH",260,"tLOW",500) ; // data table, scale of desired units,
// name1, USL1, name2, USL2
get_generic( RawDataTable, "nS", "Voltage", "tHIGH", , 400 );
get_generic( RawDataTable, "nS", "Voltage", "tLOW", , 400 );

I left in all of the previously commented out code.