318527_en-US

liliconcom

For loop for fit least square

Hi,

I try to get out the contour plot from fit least square model. So, I generate the for loop so I can get the model by vary one of the factor.

Problem is, after run the script, all chart show the same factor (suppose to vary Boule ID). It will show the last Boule ID on all tab I generated.

 

names default to here (1);
dt = current data table ();
 
listID = {"108400", "108610", "109105", "109350", "109838", "109900", "109903", "109904",
"110397", "110422", "110423", "110939", "111167", "111206", "111309", "111704",
"112505", "113023", "113045", "113227", "113344", "113504", "115983", "116118",
"116489", "116490", "116534", "116609", "119687", "119849", "119852", "120478",
"120856", "121030", "121117", "121640"} ;
 
nw = new window ("Contour", tb = tab box(),my vlb = v list box()); 
 
for (i = 1, i<= n items (listID), i++, 
tb << add (listID[i], my vlb = v list box()); 
my vlb<< append(obj = Fit Model(
 Y( :Center_Median_BAPL ),
 Effects(
  :PLMedian & RS,
  :Boule_Position & RS,
  :Boule_Position * :Boule_Position,
  :Boule_ID
 ),
 Personality( "Standard Least Squares" ),
 Emphasis( "Effect Leverage" ),
 Run(
  Profiler(
   1,
   Confidence Intervals( 1 ),
   Term Value(
    PLMedian( 925.7, Min( 908 ), Lock( 0 ), Show( 1 ) ),
    Boule_Position( 0.82, Lock( 0 ), Show( 1 ) ),
    Boule_ID( listID[i], Lock( 0 ), Show( 1 ) )
   ),
   Simulator(
    1,
    Factors(
     PLMedian << Fixed( 925.7 ),
     Boule_Position << Fixed( 0.82 )
     
    ),
    Responses( Center_Median_BAPL << No Noise )
   ),
   Simulator( 0 )
  ),
  Contour Profiler(
   1,
   Term Value(
    PLMedian( 925.7, Min( 910 ), Max( 925 ), Lock( 0 ), Show( 1 ) ),
    Boule_Position( 0.82, Lock( 0 ), Show( 1 ) ),
    Boule_ID( listID[i], Lock( 0 ), Show( 1 ) )
   ),
   Simulator(
    1,
    Factors(
     PLMedian << Fixed( 925.7 ),
     Boule_Position << Fixed( 0.82 )
     
         ),
    Responses( Center_Median_BAPL << No Noise )
   ),
   Simulator( 0 ),
   Contour Value(
    Center_Median_BAPL(
     903.5,
     Lo Limit( 901 ),
     Hi Limit( 905 ),
     Min( 893.5 ),
     Max( 913.5 )
    )
   ),
   Grid Density( "40 x 40" ),
   Contour Grid( 900, 910, 1, Center_Median_BAPL ),
   Horizontal Factor( :Boule_Position ),
   Vertical Factor( :PLMedian )
  ),
  :Center_Median_BAPL << {Summary of Fit( 0 ), Analysis of Variance( 0),
  Parameter Estimates( 0 ), Scaled Estimates( 0 ), EffectSummary(0),Lack Of Fit (0), Effect Tests(0), Prediction Profiler (0),
  Plot Actual by Predicted( 0 ), Plot Regression( 0 ),
  Plot Residual by Predicted( 0 ), Plot Studentized Residuals(0 ),
  Plot Effect Leverage( 0 ), Plot Residual by Normal Quantiles( 0 ),
  Box Cox Y Transformation( 0 ), Show VIF( 0)}
 ),
 Local Data Filter(
  Add Filter(
   columns( :Boule_Position ),
   Where( :Boule_Position >= 0.5992 & :Boule_Position <= 0.82 )
  )
 ),
 SendToReport(
  Dispatch(
   {"Response Center_Median_BAPL", "Contour Profiler"},
   "1",
   ScaleBox,
   {Min( 0.5992 ), Max( 0.82 ), Inc( 0.02 ), Minor Ticks( 0 ),
   Label Row( Show Major Grid( 1 ) )}
  ),
  Dispatch(
   {"Response Center_Median_BAPL", "Contour Profiler"},
   "2",
   ScaleBox,
   {Min( 908 ), Max( 925 ), Inc( 1 ), Minor Ticks( 0 ),
   Label Row( Show Major Grid( 1 ) )}
  ),
  Dispatch(
   {"Response Center_Median_BAPL", "Contour Profiler"},
   "Contour Profiler Frame",
   FrameBox,
   {Frame Size( 513, 467 ), DispatchSeg(
    Contour Seg( 4 ),
    {Line Color( "None" ), Fill Color( {212, 73, 88} )}
   )}
  )
 )
);
 
 
 
)

 
);

ScriptingRe: For loop for fit least square

I believe what is happening, is that all of your platform code is being appended to your V List Box() before it is executed, and when it is executed, all of the values of the variable i are the same, so I have modified the code to substitute in the exact value of the variable, before the append takes place.

Try it and see if it helps......I could not test the code since I don't have your data table with all of the specifics for the analysis.

Names Default To Here( 1 );
dt = Current Data Table();
 
listID = {"108400", "108610", "109105", "109350", "109838", "109900", "109903", "109904", "110397", "110422", "110423", "110939", "111167", "111206",
"111309", "111704", "112505", "113023", "113045", "113227", "113344", "113504", "115983", "116118", "116489", "116490", "116534", "116609", "119687",
"119849", "119852", "120478", "120856", "121030", "121117", "121640"};
 
nw = New Window( "Contour", tb = Tab Box(), my vlb = V List Box() ); 
 
For( i = 1, i <= N Items( listID ), i++,
 tb << Add( listID[i], my vlb = V List Box() );
 Eval(
  Substitute(
    Expr(
     my vlb << append(
      obj = Fit Model(
       Y( :Center_Median_BAPL ),
       Effects( :PLMedian & RS, :Boule_Position & RS, :Boule_Position * :Boule_Position, :Boule_ID ),
       Personality( "Standard Least Squares" ),
       Emphasis( "Effect Leverage" ),
       Run(
        Profiler(
         1,
         Confidence Intervals( 1 ),
         Term Value(
          PLMedian( 925.7, Min( 908 ), Lock( 0 ), Show( 1 ) ),
          Boule_Position( 0.82, Lock( 0 ), Show( 1 ) ),
          Boule_ID( __listID__, Lock( 0 ), Show( 1 ) )
         ),
         Simulator(
          1,
          Factors(
           PLMedian << Fixed( 925.7 ),
           Boule_Position << Fixed( 0.82 )
     
          ),
          Responses( Center_Median_BAPL << No Noise )
         ),
         Simulator( 0 )
        ),
        Contour Profiler(
         1,
         Term Value(
          PLMedian( 925.7, Min( 910 ), Max( 925 ), Lock( 0 ), Show( 1 ) ),
          Boule_Position( 0.82, Lock( 0 ), Show( 1 ) ),
          Boule_ID( __listID__, Lock( 0 ), Show( 1 ) )
         ),
         Simulator(
          1,
          Factors(
           PLMedian << Fixed( 925.7 ),
           Boule_Position << Fixed( 0.82 )
     
          ),
          Responses( Center_Median_BAPL << No Noise )
         ),
         Simulator( 0 ),
         Contour Value( Center_Median_BAPL( 903.5, Lo Limit( 901 ), Hi Limit( 905 ), Min( 893.5 ), Max( 913.5 ) ) ),
         Grid Density( "40 x 40" ),
         Contour Grid( 900, 910, 1, Center_Median_BAPL ),
         Horizontal Factor( :Boule_Position ),
         Vertical Factor( :PLMedian )
        ),
        :Center_Median_BAPL << {Summary of Fit( 0 ), Analysis of Variance( 0 ), Parameter Estimates( 0 ),
        Scaled Estimates( 0 ), EffectSummary( 0 ), Lack Of Fit( 0 ), Effect Tests( 0 ), Prediction Profiler( 0 ),
        Plot Actual by Predicted( 0 ), Plot Regression( 0 ), Plot Residual by Predicted( 0 ), Plot Studentized Residuals( 0 ),
        Plot Effect Leverage( 0 ), Plot Residual by Normal Quantiles( 0 ), Box Cox Y Transformation( 0 ), Show VIF( 0 )}
       ),
       Local Data Filter(
        Add Filter( columns( :Boule_Position ), Where( :Boule_Position >= 0.5992 & :Boule_Position <= 0.82 ) )
       ),
       SendToReport(
        Dispatch(
         {"Response Center_Median_BAPL", "Contour Profiler"},
         "1",
         ScaleBox,
         {Min( 0.5992 ), Max( 0.82 ), Inc( 0.02 ), Minor Ticks( 0 ), Label Row( Show Major Grid( 1 ) )}
        ),
        Dispatch(
         {"Response Center_Median_BAPL", "Contour Profiler"},
         "2",
         ScaleBox,
         {Min( 908 ), Max( 925 ), Inc( 1 ), Minor Ticks( 0 ), Label Row( Show Major Grid( 1 ) )}
        ),
        Dispatch(
         {"Response Center_Median_BAPL", "Contour Profiler"},
         "Contour Profiler Frame",
         FrameBox,
         {Frame Size( 513, 467 ), DispatchSeg( Contour Seg( 4 ), {Line Color( "None" ), Fill Color( {212, 73, 88} )} )}
        )
       )
      )
     )
    ),
   Expr( __ListID__ ), ListID[i]
  )
 );
);