nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

JMP Pro 15 and Matlab connection

yvesprairie

Hi all,

Am I correct in thinking that the bug that prevented us from using the JMP to Matlab on JMP 14 (for those of us using JMP on a Mac) is not fixed in JMP 15?? If so, this is rather disappointing.... Any information on this would be useful.

Regards, Yves P.

Accepted answers

Mark_Zwald

Understood but if you want to give it a shot anyway, holding Command+R while your computer is booting will put it in recovery mode and then SIP can be disabled as mentioned. Unfortunately it is not possible to disable SIP outside of recovery mode.

All comments

Mark_Zwald

You can try disabling OSX System Integrity Protection (SIP) by typing the following command in a terminal window:

csrutil disable

Restart your system and see if that resolves the JMP-MATLAB integration issue. Though this is not an advisable long term solution.

yvesprairie

Thank you very much mzwald for the information you provided. Unfortunately, when I tried your suggested solution, it seems it is only available when the OS is in Recovery mode which doesn't seem like a reasonable solution as a workaround. If you are aware of any other method, I will gladly try it.

Regards and thanks again, Yves P.

Mark_Zwald

yvesprairie

Hello mzwald,

Thank you for your workaround, the solution worked perfectly.

Regards, Yves