83653_zh-CN

liliconcom

幽灵图

好吧，我对此感到困惑，但没有找到合乎逻辑的结论，希望有人可以至少解释为什么我得到的东西，即使它不能解决我的需求。

dt = Open ();

col_list = dt << get column names(string);

remove from(col_list, 1); // Remove time[sec] from list
cols_to_plot = {};
offset_list  = {};
offset_cols  = {};
// Define the graph builder commands in an expression for use by the OK button
graph_expr = expr(
 for (i = 1, i <= nitems(cols_to_plot), i++,
  new_name = cols_to_plot[i] || "-Chemical Cal";
  insertinto(offset_cols, new_name);
  dt << new column(new_name, Numeric, "Continuous", Format( "Best", 12 ),
   Formula( as column(dt, cols_to_plot[i]) * offset_list[i] ) );
   
 );
// Now for the graph - build a text string and then execute it
 gb_text = "\[gb = graph builder(
 show control panel(0),
 variables(
  X( :Name( "Time[sec]" ) ),]\";
 elements_txt = " ),
 Elements( Line( X, ";
 
 For( i = 1, i <= N Items( cols_to_plot ), i++,
  If( i == 1, 
  // then
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ) ), ]\" )
  , 
  // else
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ), Position( 1 ) ),]\" )
  );

  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );

 elements_txt = elements_txt ||
 "Legend( 7 ) ), 
 Points( X, ";
 
 For( i = 1, i <= N Items( cols_to_plot ), i++,
  If( i == 1, 
  // then
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ) ), ]\" )
  , 
  // else
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ), Position( 1 ) ),]\" )
  );

  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );

 elements_txt = elements_txt || 
 "Legend(8)))";
 gb_text = gb_text || elements_txt || "); ";
 Eval( Parse( gb_text ) );
 
);


 

nw = new window("Graph Chemicals",
 panel box("Select channels to graph",
  lineup box(ncol(2), 
   text box("Column"), text box("Chemical Cal"),
   cb1 = checkbox("Ch1"), ch1_neb = number edit box(),
   cb2 = checkbox("Ch2"), ch2_neb = number edit box(),
   cb3 = checkbox("Ch3"), ch3_neb = number edit box(),
   cb4 = checkbox("Ch4"), ch4_neb = number edit box(),
   cb5 = checkbox("Ch5"), ch5_neb = number edit box(),
   cb6 = checkbox("Ch6"), ch6_neb = number edit box(),
   cb7 = checkbox("Ch7"), ch7_neb = number edit box(),
   cb8 = checkbox("Ch8"), ch8_neb = number edit box(),
   cb9 = checkbox("Ch9"), ch9_neb = number edit box(),
  ),
 ),
 panelbox("Actions",
  hlistbox(
   okb  = button box("OK",
    if (cb1 << get(1), 
     insertinto(cols_to_plot, col_list[8]);
     offset_value = ch1_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb2 << get(1), 
     insertinto(cols_to_plot, col_list[9]);
     offset_value = ch2_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb3 << get(1), 
     insertinto(cols_to_plot, col_list[10]);
     offset_value = ch3_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb4 << get(1), 
     insertinto(cols_to_plot, col_list[11]);
     offset_value = ch4_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb5 << get(1), 
     insertinto(cols_to_plot, col_list[12]);
     offset_value = ch5_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb6 << get(1), 
     insertinto(cols_to_plot, col_list[13]);
     offset_value = ch6_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb7 << get(1), 
     insertinto(cols_to_plot, col_list[14]);
     offset_value = ch7_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb8 << get(1), 
     insertinto(cols_to_plot, col_list[15]);
     offset_value = ch8_neb << get;
     insertinto(offset_list, offset_value);
    );
    graph_expr;
    nw << close window;
   ),
   canb = button box("Cancel", nw << close window;
   ),
  )
 ),
);

// Pre-check checkboxes if column exists
for (i = 1, i <= nitems(col_list), i++,
 if (col_list[i] == "Ch1", cb1 << set(1, 1),
  col_list[i] == "Ch2", cb2 << set(1, 1),
  col_list[i] == "Ch3", cb3 << set(1, 1),
  col_list[i] == "Ch4", cb4 << set(1, 1),
  col_list[i] == "Ch5", cb5 << set(1, 1),
  col_list[i] == "Ch6", cb6 << set(1, 1),
  col_list[i] == "Ch7", cb7 << set(1, 1),
  col_list[i] == "Ch8", cb8 << set(1, 1),
  col_list[i] == "Ch9", cb9 << set(1, 1),
 );
);

脚本是这样的，目的是创建一个显示线和点的单个图形，它可以在窗口中选择任意数量的列（由化学校准因子修改），这个脚本可以做到这一点，但无论出于何种原因，我也是得到一个错误的平滑图，有点，我找不到解释。我只能假设它是由于变量脚本的重复，但我不知道如何消除或定制它并得到我想要的结果。

 

 

这就是不受欢迎的图形，以及脚本显示的内容应该在我运行脚本后绘制

我无法在脚本上找到解释如何生成平滑脚本的任何地方，但它确实如此。我尝试在第三行添加一个平滑的图形，以查看它是否会删除或覆盖不需要的图形而没有成功，并试图写入下一个图例的定义也没有成功，因为它不在脚本中脚本无法识别它。

无论如何，希望有人会有一个想法，提前感谢您的帮助！

回复：幽灵图

dt = Open ();

col_list = dt << get column names(string);

remove from(col_list, 1); // Remove time[sec] from list
cols_to_plot = {};
offset_list  = {};
offset_cols  = {};
// Define the graph builder commands in an expression for use by the OK button
graph_expr = expr(
 for (i = 1, i <= nitems(cols_to_plot), i++,
  new_name = cols_to_plot[i] || "-Chemical Cal";
  insertinto(offset_cols, new_name);
  dt << new column(new_name, Numeric, "Continuous", Format( "Best", 12 ),
   Formula( as column(dt, cols_to_plot[i]) * offset_list[i] ) );
   
 );
// Now for the graph - build a text string and then execute it
 gb_text = "\[gb = graph builder(
 show control panel(0),
 variables(
  X( :Name( "Time[sec]" ) ),]\";
 elements_txt = " ),
 Elements( Line( X, ";
 
 For( i = 1, i <= N Items( cols_to_plot ), i++,
  If( i == 1, 
  // then
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ) ), ]\" )
  , 
  // else
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ), Position( 1 ) ),]\" )
  );

  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );

 elements_txt = elements_txt ||
 "Legend( 7 ) ), 
 Points( X, ";
 
 For( i = 1, i <= N Items( cols_to_plot ), i++,
  
  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );

 elements_txt = elements_txt || 
 "Legend(8)))";
 
 gb_text = gb_text || elements_txt || "); ";
 Eval( Parse( gb_text ) );
 
);


 

nw = new window("Graph Chemicals",
 panel box("Select channels to graph",
  lineup box(ncol(2), 
   text box("Column"), text box("Chemical Cal"),
   cb1 = checkbox("Ch1"), ch1_neb = number edit box(),
   cb2 = checkbox("Ch2"), ch2_neb = number edit box(),
   cb3 = checkbox("Ch3"), ch3_neb = number edit box(),
   cb4 = checkbox("Ch4"), ch4_neb = number edit box(),
   cb5 = checkbox("Ch5"), ch5_neb = number edit box(),
   cb6 = checkbox("Ch6"), ch6_neb = number edit box(),
   cb7 = checkbox("Ch7"), ch7_neb = number edit box(),
   cb8 = checkbox("Ch8"), ch8_neb = number edit box(),
   cb9 = checkbox("Ch9"), ch9_neb = number edit box(),
  ),
 ),
 panelbox("Actions",
  hlistbox(
   okb  = button box("OK",
    if (cb1 << get(1), 
     insertinto(cols_to_plot, col_list[8]);
     offset_value = ch1_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb2 << get(1), 
     insertinto(cols_to_plot, col_list[9]);
     offset_value = ch2_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb3 << get(1), 
     insertinto(cols_to_plot, col_list[10]);
     offset_value = ch3_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb4 << get(1), 
     insertinto(cols_to_plot, col_list[11]);
     offset_value = ch4_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb5 << get(1), 
     insertinto(cols_to_plot, col_list[12]);
     offset_value = ch5_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb6 << get(1), 
     insertinto(cols_to_plot, col_list[13]);
     offset_value = ch6_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb7 << get(1), 
     insertinto(cols_to_plot, col_list[14]);
     offset_value = ch7_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb8 << get(1), 
     insertinto(cols_to_plot, col_list[15]);
     offset_value = ch8_neb << get;
     insertinto(offset_list, offset_value);
    );
    graph_expr;
    nw << close window;
   ),
   canb = button box("Cancel", nw << close window;
   ),
  )
 ),
);

// Pre-check checkboxes if column exists
for (i = 1, i <= nitems(col_list), i++,
 if (col_list[i] == "Ch1", cb1 << set(1, 1),
  col_list[i] == "Ch2", cb2 << set(1, 1),
  col_list[i] == "Ch3", cb3 << set(1, 1),
  col_list[i] == "Ch4", cb4 << set(1, 1),
  col_list[i] == "Ch5", cb5 << set(1, 1),
  col_list[i] == "Ch6", cb6 << set(1, 1),
  col_list[i] == "Ch7", cb7 << set(1, 1),
  col_list[i] == "Ch8", cb8 << set(1, 1),
  col_list[i] == "Ch9", cb9 << set(1, 1),
 );
);

这是一个奇迹，但它有效，我知道它与冗余有关，但我无法弄清楚如何在不破坏它的情况下删除一个段，最后想出来了！现在，如果我只能调整点大小，那么它只是XD线

 

回复：幽灵图

Graph Builder(
 Show Control Panel( 0 ),
 Variables(
  X( :Name( "Time[sec]" ) ),
  Y( :Name( "CH2-Chemical Cal" ) ),
  Y( :Name( "CH5-Chemical Cal" ), Position( 1 ) ),
  Y( :Name( "CH6-Chemical Cal" ), Position( 1 ) ),
  Y( :Name( "CH5-Chemical Cal" ), Position( 1 ) ),
  Y( :Name( "CH6-Chemical Cal" ), Position( 1 ) )
 ),
 Elements(
  Line( X, Y( 1 ), Y( 2 ), Y( 3 ), Legend( 7 ) ),
  Points( X, Y( 1 ), Y( 2 ), Y( 3 ), Legend( 8 ) )
 ),
 SendToReport( Dispatch( {}, "Graph Builder", FrameBox, {Marker Size( 0 )} ) )
);

 

有趣的是，在我删除了错误的图形之后，第一个通道（正在复制）只有一个Y变量，而另外两个仍然存在，但是没有创建错误的图形。图表的目的是能够创建我需要的许多行，能够选择图表的峰值段以便于识别峰值，同时具有线条外观，因为这是最容易查看所需的出现。由于线条不允许您选择线上的点，因此该功能需要点，但在视觉上是不必要的。

 

抱歉延误，感恩节假期很漫长，我希望你的节日很愉快^。^

回复：幽灵图

Damion，

请使用所需图表的图表构建器代码更新帖子。由于您已创建列，因此请使用指向并单击（GUI）。

 

从您的电子邮件中我得到的印象是您想要这样的东西

Graph Builder(
 Show Control Panel( 0 ),
 Variables(
  X( :Name( "Time[sec]" ) ),
  Y( :Name( "CH2" ) ),
  Y( :Name( "CH2-Chemical Cal" ), Position(1) )
 ),
 Elements(
  Position( 1, 1 ),
  Line( X, Y(1), Y(2) Legend( 7 ) ),
  Points( X, Y(1), Y(2) Legend( 8 ) ) //maybe remove Y(2) from points?
 ),
);

这将覆盖两条曲线。我只是在猜测？

回复：幽灵图

我怀疑这是问题的一部分，但如果我只使用单个图形运行完全相同的脚本（点或线无关紧要），它不会创建额外的图形。

dt = Open ();

col_list = dt << get column names(string);

remove from(col_list, 1); // Remove time[sec] from list
cols_to_plot = {};
offset_list  = {};
offset_cols  = {};
// Define the graph builder commands in an expression for use by the OK button
graph_expr = expr(
 for (i = 1, i <= nitems(cols_to_plot), i++,
  new_name = cols_to_plot[i] || "-Chemical Cal";
  insertinto(offset_cols, new_name);
  dt << new column(new_name, Numeric, "Continuous", Format( "Best", 12 ),
   Formula( as column(dt, cols_to_plot[i]) * offset_list[i] ) );
   
 );
// Now for the graph - build a text string and then execute it
 gb_text = "\[gb = graph builder(
 show control panel(0),
 variables(
  X( :Name( "Time[sec]" ) ),]\";
 elements_txt = " ),
 Elements( Line( X, ";
 
 For( i = 1, i <= N Items( cols_to_plot ), i++,
  If( i == 1, 
  // then
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ) ), ]\" )
  , 
  // else
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ), Position( 1 ) ),]\" )
  );

  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );

// add in the marker and transparency code
 elements_txt = elements_txt ||
 "Legend( 7 ) ), Points( X, Y, Legend(8))),
SendToReport(
  Dispatch(
   {},
   \!"400\!",
   ScaleBox,
   {Legend Model(
    8,
    Properties( 0, {Marker Size( 0 ), Transparency( 0 )}, Item ID( \!""
  || offset_cols[1] || "\!", 1 ) )
   )}
  )
 )";
 gb_text = gb_text || elements_txt || "); ";
 Eval( Parse( gb_text ) );
 
);


 

nw = new window("Graph Chemicals",
 panel box("Select channels to graph",
  lineup box(ncol(2), 
   text box("Column"), text box("Chemical Cal"),
   cb1 = checkbox("Ch1"), ch1_neb = number edit box(),
   cb2 = checkbox("Ch2"), ch2_neb = number edit box(),
   cb3 = checkbox("Ch3"), ch3_neb = number edit box(),
   cb4 = checkbox("Ch4"), ch4_neb = number edit box(),
   cb5 = checkbox("Ch5"), ch5_neb = number edit box(),
   cb6 = checkbox("Ch6"), ch6_neb = number edit box(),
   cb7 = checkbox("Ch7"), ch7_neb = number edit box(),
   cb8 = checkbox("Ch8"), ch8_neb = number edit box(),
   cb9 = checkbox("Ch9"), ch9_neb = number edit box(),
  ),
 ),
 panelbox("Actions",
  hlistbox(
   okb  = button box("OK",
    if (cb1 << get(1), 
     insertinto(cols_to_plot, col_list[8]);
     offset_value = ch1_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb2 << get(1), 
     insertinto(cols_to_plot, col_list[9]);
     offset_value = ch2_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb3 << get(1), 
     insertinto(cols_to_plot, col_list[10]);
     offset_value = ch3_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb4 << get(1), 
     insertinto(cols_to_plot, col_list[11]);
     offset_value = ch4_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb5 << get(1), 
     insertinto(cols_to_plot, col_list[12]);
     offset_value = ch5_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb6 << get(1), 
     insertinto(cols_to_plot, col_list[13]);
     offset_value = ch6_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb7 << get(1), 
     insertinto(cols_to_plot, col_list[14]);
     offset_value = ch7_neb << get;
     insertinto(offset_list, offset_value);
    );
    if (cb8 << get(1), 
     insertinto(cols_to_plot, col_list[15]);
     offset_value = ch8_neb << get;
     insertinto(offset_list, offset_value);
    );
    graph_expr;
    nw << close window;
   ),
   canb = button box("Cancel", nw << close window;
   ),
  )
 ),
);

// Pre-check checkboxes if column exists
for (i = 1, i <= nitems(col_list), i++,
 if (col_list[i] == "Ch1", cb1 << set(1, 1),
  col_list[i] == "Ch2", cb2 << set(1, 1),
  col_list[i] == "Ch3", cb3 << set(1, 1),
  col_list[i] == "Ch4", cb4 << set(1, 1),
  col_list[i] == "Ch5", cb5 << set(1, 1),
  col_list[i] == "Ch6", cb6 << set(1, 1),
  col_list[i] == "Ch7", cb7 << set(1, 1),
  col_list[i] == "Ch8", cb8 << set(1, 1),
  col_list[i] == "Ch9", cb9 << set(1, 1),
 );
);

并且它实际上不应该生成额外的Y，它是一个if if else，所以只应该生成其中一个，但我认为这是因为我复制了if if然后放入第二个图并且它创建了这个ghost，我认为当你从该构建中查看生成的脚本时，我会支持它

 

Graph Builder(
 Show Control Panel( 0 ),
 Variables(
  X( :Name( "Time[sec]" ) ),
  Y( :Name( "CH2-Chemical Cal" ) ),
  Y( :Name( "CH2-Chemical Cal" ) )
 ),
 Elements(
  Position( 1, 1 ),
  Line( X, Y, Legend( 7 ) ),
  Points( X, Y, Legend( 8 ) )
 ),
 Elements(
  Position( 1, 2 ),
  Points( X, Y, Legend( 9 ) ),
  Smoother( X, Y, Legend( 10 ) )
 )
);

因为它不仅添加了更平滑和第二个图形，而且还添加了更平滑的第二个点图

 

 

我试过删除

|| 评估插入 （ “Y（^ i ^），” ）

从脚本中的元素之后它基本上把它变成了一条垂直线（并且仍然产生了更平滑和点图，神奇地）

回复：幽灵图

对于不必要的名称，您似乎有重复的代码（额外的复制粘贴？）。  你需要两个元素，但Y名称一次。  重复的名称再次绘制Y（1），默认值是更平滑的元素

 

以下是BigClass。下一个JSL是脚本中的重复代码。

Graph Builder(
 Size( 528, 454 ),
 Show Control Panel( 0 ),
 Variables( X( :weight ), Y( :height ) ),
 Elements( Points( X, Y, Legend( 3 ) ), Line( X, Y, Legend( 5 ) ) )
)

 

For( i = 1, i <= N Items( cols_to_plot ), i++,
  If( i == 1, 
  // then
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ) ), ]\" )
  , 
  // else
   gb_text = gb_text || Eval Insert( "\!N\[  Y( :Name( "^offset_cols[i]^" ), Position( 1 ) ),]\" )
  );

  elements_txt = elements_txt || Eval Insert( "Y ( ^i^ ), " );
 );