JSL 코드를 작성할 때 종종 JSL 명령 행이 길어집니다. 필자가 작성한 코드를 더 쉽게 읽고 체계적으로 구성 할 수 있기 때문에 긴 행을 좋아하고 대형 모니터가이 디스플레이를 처리 할 수 있습니다. 환경 설정에서 텍스트 줄 바꿈을 사용할 수 없도록 설정했지만, 스크립트 재구성 (Edit | Reformat Script) 명령을 호출하면 많은 긴 행이 래핑되고 이제는 하드 리턴이 영구적으로 유지됩니다. Reformat Script 명령을 사용하여 긴 행을 그대로두고 들여 쓰기 용으로 다시 포맷하는 것이 좋습니다. 환경 설정에서이 긴 행을 그대로 유지하고 하나 이상의 하드 리턴을하지 않는 설정이 있습니까? 필자는 코드의 예제를 선호하고 Reformat Script 하드 리턴을 삽입하여 포함 시켰습니다.
Example of code with all commands on same row
Column( "TIMESTAMP" ) << Set Name( "Date & Time" );
Column( "Date & Time" ) << Data Type( "Numeric", Format( "m/d/y h:m" ) );
Try( Column( "RECORD" ) << Set Name( "Record #" ) );
Try( Column( "Prog_ID" ) << Set Name( "Program ID" ) << Format( "Fixed Dec", 3 ) );
Try( Column( "Sys_Amp_hr_Tot" ) << Set Name( "Current Usage by Total System (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 83 ) );
Try( Column( "Load_Amp_hr_Tot" ) << Set Name( "Current Usage by Datalogger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 80 ) );
Try( Column( "Batt_Amp_hr_Tot" ) << Set Name( "Current Entering Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "IBatt_Amp_hr_Tot" ) << Set Name( "Current Entering/Exiting Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "I_In_Chg_Amp_hr_Tot" ) << Set Name( "Current Entering Charger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "V_in_chg_Avg" ) << Set Name( "Charger Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "VBatt_Avg" ) << Set Name( "Battery Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "Counts_Charge_State_None_Tot" ) << Set Name( "Charge State - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Current_Ltd_Tot" ) << Set Name( "Charge State - Current Ltd (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Cyclic_Tot" ) << Set Name( "Charge State - Cyclic (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Float_Tot" ) << Set Name( "Charge State - Float (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Battery_Test_Tot" ) << Set Name( "Charge State - Battery Test (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_Source_None_Tot" ) << Set Name( "Charge Source - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 56 ) );
Try( Column( "Counts_Charge_Source_Solar_Tot" ) << Set Name( "Charge Source - Solar (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 56 ) );
Try( Column( "Counts_Charge_Source_Continuous_Tot" ) << Set Name( "Charge Source - Continuous (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 75 ) );
Try( Column( "Qloss" ) << Set Name( "Qloss (Amp_Hr/Day)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 67 ) );
Try( :Name( "Power Usage by Total System (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by Datalogger (W/Day)" ) << Set Display Width( 73 ) );
Try( :Name( "Power Usage by Battery (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by CH200 (W/Day)" ) << Set Display Width( 65 ) );
********************************
Example of code after running Edit | Reformat Script.
Column( "TIMESTAMP" ) << Set Name( "Date & Time" );
Column( "Date & Time" ) << Data Type( "Numeric", Format( "m/d/y h:m" ) );
Try( Column( "RECORD" ) << Set Name( "Record #" ) );
Try( Column( "Prog_ID" ) << Set Name( "Program ID" ) << Format( "Fixed Dec", 3 ) );
Try(
Column( "Sys_Amp_hr_Tot" ) << Set Name( "Current Usage by Total System (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 83 )
);
Try(
Column( "Load_Amp_hr_Tot" ) << Set Name( "Current Usage by Datalogger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 80 )
);
Try( Column( "Batt_Amp_hr_Tot" ) << Set Name( "Current Entering Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try(
Column( "IBatt_Amp_hr_Tot" ) << Set Name( "Current Entering/Exiting Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 73 )
);
Try(
Column( "I_In_Chg_Amp_hr_Tot" ) << Set Name( "Current Entering Charger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 73 )
);
Try( Column( "V_in_chg_Avg" ) << Set Name( "Charger Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "VBatt_Avg" ) << Set Name( "Battery Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try(
Column( "Counts_Charge_State_None_Tot" ) << Set Name( "Charge State - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Current_Ltd_Tot" ) << Set Name( "Charge State - Current Ltd (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Cyclic_Tot" ) << Set Name( "Charge State - Cyclic (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Float_Tot" ) << Set Name( "Charge State - Float (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Battery_Test_Tot" ) << Set Name( "Charge State - Battery Test (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_Source_None_Tot" ) << Set Name( "Charge Source - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 56 )
);
Try(
Column( "Counts_Charge_Source_Solar_Tot" ) << Set Name( "Charge Source - Solar (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 56 )
);
Try(
Column( "Counts_Charge_Source_Continuous_Tot" ) << Set Name( "Charge Source - Continuous (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 75 )
);
Try( Column( "Qloss" ) << Set Name( "Qloss (Amp_Hr/Day)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 67 ) );
Try( :Name( "Power Usage by Total System (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by Datalogger (W/Day)" ) << Set Display Width( 73 ) );
Try( :Name( "Power Usage by Battery (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by CH200 (W/Day)" ) << Set Display Width( 65 ) );
유감 이네요. 알려 줘서 고마워. 나는 JMP 지원에 대한 기능 요청을 할 것이다.
