Lorsque j'écris du code JSL, j'ai souvent de longues lignes de commandes JSL. J'aime les longues lignes car cela facilite la lecture / l'organisation du code que j'ai écrit et mon grand moniteur peut gérer cet affichage. L'option Wrap Text est désactivée dans les préférences, mais lorsque j'appelle la commande Reformat Script (Éditer | Script Reformat), beaucoup de mes lignes les plus longues sont encapsulées et comportent désormais des retours permanents en dur. Je voudrais que la commande Script reformater laisse ces longues lignes seules et reformate simplement pour l'indentation. Y at-il un paramètre dans les préférences qui me manque qui garde ces longues lignes en l'état et ne mette pas dans une ou plusieurs déclarations? J'ai inclus un exemple de mon code comme préféré et avec les retours obligatoires de Reformat Script insérés.
Example of code with all commands on same row
Column( "TIMESTAMP" ) << Set Name( "Date & Time" );
Column( "Date & Time" ) << Data Type( "Numeric", Format( "m/d/y h:m" ) );
Try( Column( "RECORD" ) << Set Name( "Record #" ) );
Try( Column( "Prog_ID" ) << Set Name( "Program ID" ) << Format( "Fixed Dec", 3 ) );
Try( Column( "Sys_Amp_hr_Tot" ) << Set Name( "Current Usage by Total System (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 83 ) );
Try( Column( "Load_Amp_hr_Tot" ) << Set Name( "Current Usage by Datalogger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 80 ) );
Try( Column( "Batt_Amp_hr_Tot" ) << Set Name( "Current Entering Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "IBatt_Amp_hr_Tot" ) << Set Name( "Current Entering/Exiting Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "I_In_Chg_Amp_hr_Tot" ) << Set Name( "Current Entering Charger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try( Column( "V_in_chg_Avg" ) << Set Name( "Charger Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "VBatt_Avg" ) << Set Name( "Battery Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "Counts_Charge_State_None_Tot" ) << Set Name( "Charge State - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Current_Ltd_Tot" ) << Set Name( "Charge State - Current Ltd (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Cyclic_Tot" ) << Set Name( "Charge State - Cyclic (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Float_Tot" ) << Set Name( "Charge State - Float (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_State_Battery_Test_Tot" ) << Set Name( "Charge State - Battery Test (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 60 ) );
Try( Column( "Counts_Charge_Source_None_Tot" ) << Set Name( "Charge Source - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 56 ) );
Try( Column( "Counts_Charge_Source_Solar_Tot" ) << Set Name( "Charge Source - Solar (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 56 ) );
Try( Column( "Counts_Charge_Source_Continuous_Tot" ) << Set Name( "Charge Source - Continuous (Obs/Day)" ) << Format( "Fixed Dec", 0 ) << Set Display Width( 75 ) );
Try( Column( "Qloss" ) << Set Name( "Qloss (Amp_Hr/Day)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 67 ) );
Try( :Name( "Power Usage by Total System (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by Datalogger (W/Day)" ) << Set Display Width( 73 ) );
Try( :Name( "Power Usage by Battery (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by CH200 (W/Day)" ) << Set Display Width( 65 ) );
********************************
Example of code after running Edit | Reformat Script.
Column( "TIMESTAMP" ) << Set Name( "Date & Time" );
Column( "Date & Time" ) << Data Type( "Numeric", Format( "m/d/y h:m" ) );
Try( Column( "RECORD" ) << Set Name( "Record #" ) );
Try( Column( "Prog_ID" ) << Set Name( "Program ID" ) << Format( "Fixed Dec", 3 ) );
Try(
Column( "Sys_Amp_hr_Tot" ) << Set Name( "Current Usage by Total System (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 83 )
);
Try(
Column( "Load_Amp_hr_Tot" ) << Set Name( "Current Usage by Datalogger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 80 )
);
Try( Column( "Batt_Amp_hr_Tot" ) << Set Name( "Current Entering Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) << Set Display Width( 73 ) );
Try(
Column( "IBatt_Amp_hr_Tot" ) << Set Name( "Current Entering/Exiting Battery (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 73 )
);
Try(
Column( "I_In_Chg_Amp_hr_Tot" ) << Set Name( "Current Entering Charger (Amp_Hr/Day)" ) << Format( "Fixed Dec", 3 ) <<
Set Display Width( 73 )
);
Try( Column( "V_in_chg_Avg" ) << Set Name( "Charger Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try( Column( "VBatt_Avg" ) << Set Name( "Battery Voltage - Avg (V)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 59 ) );
Try(
Column( "Counts_Charge_State_None_Tot" ) << Set Name( "Charge State - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Current_Ltd_Tot" ) << Set Name( "Charge State - Current Ltd (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Cyclic_Tot" ) << Set Name( "Charge State - Cyclic (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Float_Tot" ) << Set Name( "Charge State - Float (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_State_Battery_Test_Tot" ) << Set Name( "Charge State - Battery Test (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 60 )
);
Try(
Column( "Counts_Charge_Source_None_Tot" ) << Set Name( "Charge Source - None (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 56 )
);
Try(
Column( "Counts_Charge_Source_Solar_Tot" ) << Set Name( "Charge Source - Solar (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 56 )
);
Try(
Column( "Counts_Charge_Source_Continuous_Tot" ) << Set Name( "Charge Source - Continuous (Obs/Day)" ) << Format( "Fixed Dec", 0 ) <<
Set Display Width( 75 )
);
Try( Column( "Qloss" ) << Set Name( "Qloss (Amp_Hr/Day)" ) << Format( "Fixed Dec", 1 ) << Set Display Width( 67 ) );
Try( :Name( "Power Usage by Total System (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by Datalogger (W/Day)" ) << Set Display Width( 73 ) );
Try( :Name( "Power Usage by Battery (W/Day)" ) << Set Display Width( 65 ) );
Try( :Name( "Power Usage by CH200 (W/Day)" ) << Set Display Width( 65 ) );
C'est dommage. Merci de me le faire savoir. Je vais envoyer une demande de fonctionnalité au support JMP.
