55098_zh-TW

liliconcom

使用where函數和顯示輸出來計算表達式

嗨，我正在從數據表中製作一系列圖表，這些圖表是根據另一個表中的變量名稱分開的。基本上，當我製作y對x的雙變量圖時，by從另一個名稱表中選擇。我將圖表放在一個陣容框中，但我無法獲得使用變量所代表的實際值的位置。 此外，圖形上方會顯示一個單獨的文本框，其中指定的位置不是在圖形標題中顯示。基本上，我看到Where（：Parameter == CofA_dt10：Parameter [w]）但我希望看到表達式針對w的不同值進行求值，因此我們知道圖表所代表的變量。 我已經嘗試了eval，eval expr和parse的多種變體，無法通過測試來顯示我想要的方式。我的代碼如下，任何建議將不勝感激。如果我刪除EVAL功能，它不會顯示EVAL功能，如果我刪除了EVAL功能，窗口會顯示，但上面有上述問題。

 

CofA_dt10 = Data Table( "GraphData" ) << Summary(
Group( :Parameter ),
Freq( "None" ),
Weight( "None" )
);
output2 = lineup box(Ncol(1));
 
　
row_count = nrow(CofA_dt10);
 
　
for(w=1, w<=row_count-1, w++,
 
 
output2 << append (CofA_dt9 << Bivariate(
Y( :test_value ),
X( :received_date ),
Where( :Parameter == Eval(CofA_dt10:Parameter[w])),
 
SendToReport(
Dispatch(
{},
"Bivariate Fit of CofA Parameter Value By received_date",
OutlineBox,
{Set Title( "CofA Material Parameter Value By received_date" )}
),
Dispatch( {}, "1", ScaleBox, {Label Row( Label Orientation( "Angled" ) )} ),
Dispatch( {}, "test_value", TextEditBox, {Set Text( "Value" )} )
 
)
))
　
　
); //end row loop

 

Re：用函數和顯示輸出來評估表達式你好Uday，那沒用;我無法評估表達式
哪裡聲明。但是，我修改了你發給我的代碼，我能夠
評估圖標題中的表達式。如果我找到了刪除的方法
圖形上方的文本框，其中包含以下“Where（：Parameter == Eval（
解析（Eval Insert（“Stmt”））））“那麼這應該是可以接受的
解。我仍然很好奇為什麼這在圖表標題中起作用但不在
where聲明，但這是我自己的理解。

CofA_dt10 =數據表*（*“GraphData”*）* << *摘要（*組*（*：參數）
*）*，Freq *（*“None”*）*，Weight *（*“None”*）* *）*;

output2 =陣容盒*（* N Col *（* * 1 * *）* *）*;

row_count = N Row *（* CofA_dt10 *）*;

對於*（* w = * 1 *，w <= row_count - * 1 *，w ++，

Stmt = CofA_dt10：參數* [* w *] *;

output2 << * append（*

CofA_dt9 <<

二元*（*

Y *（*：test_value *）*，

X *（*：received_date *）*，

其中*（*：參數== Eval *（* Parse *（* Eval Insert *（*“Stmt”*）* *）* *）*
*）*

SendToReport *（*

調度*（*

* {} *，

“test_value的bivariate Fit by received_date”，

OutlineBox，

* {*設置標題*（*“CofA參數值By received_date”||“”|| Eval *（*
解析*（* Eval Insert *（*“Stmt”*）* *）* *）* *）} *

*）*

派遣*（* * {} *，“1”，ScaleBox，* {*標籤行*（*標籤方向*（*
“有角度的”*）* *）} * *）*，

調度*（*

* {} *，

“test_value”

TextEditBox，

* {*設置文字*（*

“值”

*）} *

*）*

*）））*

*）; *
Re：用函數和顯示輸出來評估表達式

@tsolomon ，

  一個編輯，我認為這可能有用，如果沒有請告訴我，我會看看它

CofA_dt10 <SPAN class="token operator">=</SPAN> <SPAN class="token function">Data Table</SPAN><SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"GraphData"</SPAN> <SPAN class="token punctuation">)</SPAN> <SPAN class="token operator"><</SPAN><SPAN class="token operator"><</SPAN> Summary<SPAN class="token punctuation">(</SPAN> Group<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">:</SPAN><SPAN class="token function">Parameter</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN> Freq<SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"None"</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN> Weight<SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"None"</SPAN> <SPAN class="token punctuation">)</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">;</SPAN>
output2 <SPAN class="token operator">=</SPAN> <SPAN class="token function">Lineup Box</SPAN><SPAN class="token punctuation">(</SPAN> N Col<SPAN class="token punctuation">(</SPAN> <SPAN class="token number">1</SPAN> <SPAN class="token punctuation">)</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">;</SPAN>
 
　
row_count <SPAN class="token operator">=</SPAN> <SPAN class="token function">N Row</SPAN><SPAN class="token punctuation">(</SPAN> CofA_dt10 <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">;</SPAN>
 
　
<SPAN class="token function">For</SPAN><SPAN class="token punctuation">(</SPAN> w <SPAN class="token operator">=</SPAN> <SPAN class="token number">1</SPAN><SPAN class="token punctuation">,</SPAN> w <SPAN class="token operator"><=</SPAN> row_count <SPAN class="token operator">-</SPAN> <SPAN class="token number">1</SPAN><SPAN class="token punctuation">,</SPAN> w<SPAN class="token operator">++</SPAN><SPAN class="token punctuation">,</SPAN> 
 
 Stmt <SPAN class="token operator">=</SPAN> CofA_dt10<SPAN class="token punctuation">:</SPAN><SPAN class="token function">Parameter</SPAN><SPAN class="token punctuation">[</SPAN>w<SPAN class="token punctuation">]</SPAN><SPAN class="token punctuation">;</SPAN> 
 output2 <SPAN class="token operator"><</SPAN><SPAN class="token operator"><</SPAN> append<SPAN class="token punctuation">(</SPAN>
  CofA_dt9 <SPAN class="token operator"><</SPAN><SPAN class="token operator"><</SPAN> Bivariate<SPAN class="token punctuation">(</SPAN>
   Y<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">:</SPAN>test_value <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN>
   X<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">:</SPAN>received_date <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN>
          Eval(Parse(Eval Insert("\[Where<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">:</SPAN><SPAN class="token function">Parameter</SPAN> <SPAN class="token operator">==</SPAN> <SPAN class="token punctuation">[^</SPAN>Stmt^<SPAN class="token punctuation">]</SPAN>\"<SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">)</SPAN> <SPAN class="token punctuation">)</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN> 
 
   SendToReport<SPAN class="token punctuation">(</SPAN>
    Dispatch<SPAN class="token punctuation">(</SPAN>
     <SPAN class="token punctuation">{</SPAN><SPAN class="token punctuation">}</SPAN><SPAN class="token punctuation">,</SPAN>
     <SPAN class="token string">"Bivariate Fit of CofA Parameter Value By received_date"</SPAN><SPAN class="token punctuation">,</SPAN>
     <SPAN class="token function">OutlineBox</SPAN><SPAN class="token punctuation">,</SPAN>
     <SPAN class="token punctuation">{</SPAN>Set Title<SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"CofA Material Parameter Value By received_date"</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">}</SPAN>
    <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN>
    Dispatch<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">{</SPAN><SPAN class="token punctuation">}</SPAN><SPAN class="token punctuation">,</SPAN> <SPAN class="token string">"1"</SPAN><SPAN class="token punctuation">,</SPAN> ScaleBox<SPAN class="token punctuation">,</SPAN> <SPAN class="token punctuation">{</SPAN>Label <SPAN class="token function">Row</SPAN><SPAN class="token punctuation">(</SPAN> Label Orientation<SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"Angled"</SPAN> <SPAN class="token punctuation">)</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">}</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">,</SPAN>
    Dispatch<SPAN class="token punctuation">(</SPAN> <SPAN class="token punctuation">{</SPAN><SPAN class="token punctuation">}</SPAN><SPAN class="token punctuation">,</SPAN> <SPAN class="token string">"test_value"</SPAN><SPAN class="token punctuation">,</SPAN> <SPAN class="token function">TextEditBox</SPAN><SPAN class="token punctuation">,</SPAN> <SPAN class="token punctuation">{</SPAN>Set <SPAN class="token function">Text</SPAN><SPAN class="token punctuation">(</SPAN> <SPAN class="token string">"Value"</SPAN> <SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">}</SPAN> <SPAN class="token punctuation">)</SPAN>
 
   <SPAN class="token punctuation">)</SPAN>
  <SPAN class="token punctuation">)</SPAN>
 <SPAN class="token punctuation">)</SPAN>
　
　
<SPAN class="token punctuation">)</SPAN><SPAN class="token punctuation">;</SPAN> <SPAN class="token comment">//end row loop</SPAN>

 

Re：用函數和顯示輸出來評估表達式謝謝Uday但不幸的是，這仍然不適合我。標題
圖表顯示為“

Where（：Parameter == Eval（Parse（Eval Insert（“Stmt”））））“而不是
顯示每個圖形的Stmt。我正在使用JMP 12，如果這樣做的話
區別。
乾杯，
Tesfu

Re：用函數和顯示輸出來評估表達式

@tsolomon ，
您可能想要嘗試的是： 

CofA_dt10 = Data Table( "GraphData" ) << Summary( Group( :Parameter ), Freq( "None" ), Weight( "None" ) );
output2 = Lineup Box( N Col( 1 ) );
 
　
row_count = N Row( CofA_dt10 );
 
　
For( w = 1, w <= row_count - 1, w++, 
 
 Stmt = CofA_dt10:Parameter[w]; 
 output2 << append(
  CofA_dt9 << Bivariate(
   Y( :test_value ),
   X( :received_date ),
   Where( :Parameter == Eval(Parse(Eval Insert("\[Stmt]\")) ) ), 
 
   SendToReport(
    Dispatch(
     {},
     "Bivariate Fit of CofA Parameter Value By received_date",
     OutlineBox,
     {Set Title( "CofA Material Parameter Value By received_date" )}
    ),
    Dispatch( {}, "1", ScaleBox, {Label Row( Label Orientation( "Angled" ) )} ),
    Dispatch( {}, "test_value", TextEditBox, {Set Text( "Value" )} )
 
   )
  )
 )
　
　
); //end row loop

您基本上想要使用Eval Insert和Parse包裝eval